Genuine Manufacturer Approved replacement Burner Tube Set designed for certain Weber Grills. Consists of 1 crossover tube and 3 burner tubes. These tubes are made out of stainless steel. They allow grill temperature to be properly maintained. Easy to install with included hardware and instructional guide.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect solution
The cross burner of our grill had rusted through and needed replacement. This kit was the perfect solution. The instructions provided were easy to follow. This kit worked out great and saved me lots of $$.
Daniel - July 4, 2019
Verified Purchase
★★★★★
★★★★★
Right Part, Great Service
I found a cheap off-brand burner replacement on another site and nearly burned up my grill. Learned my lesson and found eReplacement Parts... what a difference! Perfect fit OEM burner, arrived promptly and MUCH easier to install. My Weber works like new again. Oh, and eReplacement even had burner control knobs available to replace the ones melted in the grill fire. Happy, happy, happy
Guest - April 22, 2020
Verified Purchase
★★★★★
★★★★★
Great Experience
The part was perfect, works great! Thanks
Guest - June 25, 2020
Verified Purchase
★★★★★
★★★★★
Great Place to Buy Parts
All of my parts for my Weber Genesis Silver grill arrived in a timely manner. I now have my grill working again. Bring on the meat!
Guest - November 24, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, great product, fast service
Perfect fit
Guest - January 4, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
It’s like having a new grill again. Easy installation shipped fast.
Guest - May 8, 2021
Verified Purchase
★★★★★
★★★★★
You need to use Priority Mail instead of smartpost.
As ordered.
Guest - August 5, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove LP gas tank, remove knobs, remove Grates, and Flavor bars, remove 2 screws by knob assembly. remove knob cover. remove 2 nuts holding manifold in place,unclip wires holding manifold. Remove manifold. loosen burner tube screws inside grill. pull out burner tubes,(pay attention to the way the holes face on the tubes) I like to take a
... Read more picture with smart phone. and slightly turn them to remove from grill opening. replace with new burner tubes. secure under screws in grill, slide manifold back into place, secure metal wires into holes. tighten nuts to hold manifold in place. put cover back on, tighten end screws replace knobs. hook up LP gas.
Removed the old burner tubes, which was the most difficult and time-consuming part of the repair. This was due to the age of the grill, the build up of grease and exposure to rigors of northern midwest weather. Once the old parts were removed, the rest of the repair proceeded smoothly. The instructions were clear and easily understood.
1. Removed, measured and researched part numbers from Weber.
2. Replaced burner tubes, 1 at a time in sequence so they were in the correct position.
3. Replaced burner manifold. Two hex nuts and two retaining clips held it in place.
4. Reattached to propane and lit. Works good as new!
We needed to replace the interior of our grill due to rusting and wear and tear after owning our Weber for 8 years. The parts we ordered were a perfect match. The directions were clear and easy to follow. Our grill works just like new now!
1. Cleaned out the gunk from the grill.
2. Removed top cover to the valve controllers (make it easy to access the burner tubes).
3. Installed new burners and test for gas leaks before igniting it.
4. Fired up the new burners to burn them in.
5. Grilled some chicken (it was delicious) and ready for Super Bowl Sunday
... Read more next month.
Thank you.
Read less
Did you find this story helpful?
Thank you for voting!
Grill burners were rusted through and the cooking grates were also rusted. Wheels were falling off too.
1. Remove and replace old wheels from frame.
2. Replace Hub on big wheels.
3. Remove old burners and cooking grates.
4. Clean all nasty stuff on the inside.
5. Install new burners and new grates.
6. Enjoy clean healthy cooking.
1 Removed sheet metal and control knobs Per instructions and diagram provided
2 Installed new parts per the instructions and diagram provided
I was pleasantly surprised with the clarity and information provided by the replacement parts. I would recommend them to anyone
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
