This is an original Char-Broil replacement part manufactured for use with outdoor grills. The burner is used to disperse flames evenly across the firebox. Over time the burner tubes can corrode and replacing damaged burners can extend the life of the grill. The main burners are sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect
Perfect fit! It’s like having a brand new grill
Jasmon - July 29, 2020
Verified Purchase
★★★★★
★★★★★
awesome
all the parts fit great and the grill is working fine ty will use you again if neccesary
Guest - June 5, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair
The parts fit perfectly.
Guest - July 24, 2021
Verified Purchase
★★★★★
★★★★★
Great Customer Service!
I order parts to repair my grill in the Spring and one of the parts they sent was the wrong one. I second call was all it took to get the return shipping, RMA, and correct part in the mail very quickly. Will definitely recommend these folks to people and order again when I need to.
Guest - August 15, 2022
Verified Purchase
★★★★★
★★★★★
Parts worked great!
Fast shipping and the parts fit perfect. I now have a new grill.
Guest - September 18, 2023
Verified Purchase
★★★★★
★★★★★
Main Burner Review
Part worked well once I got it in. The problem was that I could not get screw loose to have more wiggle room to move the burner unit it. The technician that put the grill together, where I bought the grill, over tighten the screws.
Guest - July 17, 2019
Verified Purchase
★★★★★
★★★★★
Satisfied overall, one item could not be used
Gas grill burners, crossover tubes and igniters were all acceptable and fit the grill as specified except one igniter hook-up wire was not long enough reach the central power box and could not be used. Had to re-install the old igniter.
Guest - March 16, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. removed every thing, cleaned out all the debris in the firebox, then reassembled in reverse order using the new parts. Taking the old stuff out was harder than installing the new stuff due to the rust and corrosion
Removed rusted parts, gave grill box good cleaning, installed new replacement parts.
Everything went very well. eReplacement parts were either genuine or exact copies of CharBroil parts being replaced. This made the repair easy, didn\'t have to struggle with aftermarket parts that may not have fit so well. Happy customer h
... Read moreere.....
Read less
Did you find this story helpful?
Thank you for voting!
Heat shield on firebox was falling off. Burners were rusting too.
1. Removed cover
2. Removed grates, flame tamers and burners.
3. Disconnected propane
4. Removed two shelves and igniter
5. Removed old fire box
6. Installed new firebox
7. Connected/replaced items in 4 thru 1 in that order
Used the pliers to remove the old hairpin clips. (rusted into place)
Then removed what was left of the burners, carry over tubes and flame tamers.
Most of the repair time was spent with the shop vac cleaning out the bottom of the grill.
Then it was just a matter of putting the new parts back in and presto it works like
... Read morenew again
Total cost was just over $60 dollars versus a new grill at about $350.
Read less
Did you find this story helpful?
Thank you for voting!
The burner tubes and crossover pipes rusted out and needed to be replaces
Removed all the rusted and broken parts and was able to easily able to replace the new parts.
1. Removed the cooking grates
2. Removed the flame covers
3. Pulled the cotter pins from the crossover tubes and burner tubes
4. Removed the burner tubes and crossover tubes
5. Replaced the tubes and crossover tubes
... Read more 6. Place the cotter pins
7. Place the flame covers and cooking grates
Read less
Did you find this story helpful?
Thank you for voting!
After several years of use, the parts listed were in tough shape due to the constant heating and cooling.
1. Removed old burners, flame tamers, and carry over tubes
2. Cleaned inside of grill removing all residue
3. Replaced burners and carry over tubes
4. Tested burners
6. Installed Flame tamers
Everything I ordered fit as expected and worked well.
1. Removed all old parts after confirming that I had indeed ordered the correct replacements.
2. Cleaned the main body of debris
3. Replaced parts.
4. Tested.
5. Success!!
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10294908
Manufacturer Part Number: G432-Y700-W1
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/parts/bbq/grill/elements-and-burners/"},{"position":3,"name":"G432-Y700-W1","title":"G432-Y700-W1","url":""}]
