Part Location Diagram of 099980425004 Homelite Breather Tube
See part B4 in the diagram
( Grid squares measure 1x1 inch )

Breather Tube 099980425004

Manufactured by:
Homelite
ERP Number:
ERP9873218
Part Number:
099980425004
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic Homelite replacement part that is sourced from the original manufacturer for use with pressure washers. The breather tube attaches to the cylinder head cover assembly. A socket set might be needed during the installation process. It may become broken and will need to be replaced. This part is made of rubber and is available as an individual replacement.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Homelite
This part works with the following products:
  • Pressure Washer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

General Maintenance

Joe from San Antonio, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Replaced Breather tube (no tools)
Replace Air cleaner element and cover (no Tools)
Replaced spark plug (socket)
Did you find this story helpful?
Thank you for voting!

Pressure Washer would not start.

Lanny from Centennial, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
1. Ordered parts that I thought might be required (received very quickly)
2. Put the entire Washer on a portable workbench
3. Removed wheels for easier access to mounting bolts and parts
4. unbolted motor mount for access to Nuts for housing cover for Air Breather and Carb
5. Replaced spark plug (adjusted Gap to sp ecs)
6. Removed Air filter assembly for access to the carburetor - Disconnected and plugged fuel line
7. Disconnected throttle spring and bar
8. Removed old carb - slid off the two mounting bolts
9. replaced 1st gasket and slid on new Carb
10. reconnected, throttle spring, and bar replaced the front gasket
11. checked linkages
12. Reconnected fuel line and breather tube
12. Remounted Air Filter assembly replaced the two mounting Nuts
13. Reattached engine to the mounting bracket
14. Reattached Wheels
15. Tested and worked great

Note: it would not have been necessary to dismount the engine if there had been better clearance to the carburetor mounting nuts... Would have saved a lot of time.



Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9873218
Manufacturer Part Number: 099980425004
Brand Model Number Description
Homelite HL252300 Pressure Washer - Pressure Washer
Homelite UT80522 Pressure Washer - Pressure Washer
Homelite UT80522A Pressure Washer - Pressure Washer
Homelite UT80522B Pressure Washer - 2700 PSI Gas Pressure Washer
Homelite UT80953 Pressure Washer - Pressure Washer
Homelite UT80953A Pressure Washer - Pressure Washer
Homelite UT80953B Pressure Washer - 2700 PSI Gas Pressure Washer