Part Location Diagram of 92190-2174 Kawasaki Tube,3x6x90
See part G-92190 in the diagram
( Grid squares measure 1x1 inch )

Tube,3x6x90 92190-2174

Manufactured by:
Kawasaki
ERP Number:
ERP9159432
Part Number:
92190-2174
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This replacement tube is a high quality item that is sourced directly from original equipment manufacturer for use with Kawasaki string trimmers and edgers. It is the return fuel line that the fuel travels in from the carburetor back in the tank. Please note one durable flexible rubber tube is included per order.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Kawasaki
This part works with the following products:
  • Trimmer
  • Edger

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Maintenance; unit had not been serviced since the date of acquisition, which was nine years ago

Steven from Hawaii National Park, Hawaii

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Removed air filter cover and replace air filter and re-installed cover
Removed fuel tank.
Removed cylinder shroud.
Removed crankcase pulse tube.
Replace crankcase pulse tube.
Flip unit over to expose bottom of carburetor where primer bulb resides.
Removed the four screws on the carburetor unit, while th e carburetor was left on the cylinder.
Removed and replaced primer bulb; re-installed the four carburetor screws.
Removed fuel grommet and fuel lines from fuel tank by using a screwdriver and prying up.
Put Vaseline on fuel filter outlet pipe and inserted fuel line.
Cut opposite end of fuel line and carburetor return hose at an angle and rubbed Vaseline to facilitate the installation of tubes into fuel grommet.
Applied Vaseline to fuel grommet and inserted fuel into orifice of fuel tank by placing at an angle and rotating while pushing down.
Ensured fuel tubes line lengths exiting from the tank was at the proper length if not pulled or pushed as necessary.
Re-installed fuel tank and cylinder shroud using loctite.
Did you find this story helpful?
Thank you for voting!

Government Mandated Ethanol Ruined Fuel System

Rob from OTTSVILLE, Pennsylvania

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Removed affected fuel system parts, fuel lines, grommets, carburetor and replaced with new parts. Ethanol lowers fuel economy and ruins fuel systems in everything, we all should demand an end to it\'s force use on us all.
Did you find this story helpful?
Thank you for voting!

My trimmer is about 25 years old, all the fuel lines were rotten

Dale from Sgt Bluff, Iowa

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
I removed all the old parts and replaced them
Did you find this story helpful?
Thank you for voting!
  • 1