This air filter is an original sourced directly from Craftsman. The filters purpose is to keep dirt, dust and other contaminants from entering the carburetor and engine. You can clean this foam filter by putting it in a clean plastic bag with a little oil and rub the oil into the filter, then remove the filter and squeeze it in a paper towel to remove the excess oil. This is an individually sold part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy replacement
Fast shipping
Thomas - July 20, 2020
Verified Purchase
★★★★★
★★★★★
The right part!
Exactly what I needed. I have had many experiences where it showed it was the right part, but it wasn't.
All my parts matched my mower exactly.
Guest - March 30, 2021
Verified Purchase
★★★★★
★★★★★
correct parts
The parts were the right ones. price was fair, shipping costa were fair, and they got here in timely manner. I would buy parts again from them
Guest - March 30, 2021
Verified Purchase
★★★★★
★★★★★
String trimmer filter replacement: Quick delivery and easy to find on web site
Fit perfectly and string trimmer worked fine will definitely buy from you again.
Guest - May 5, 2021
Verified Purchase
★★★★★
★★★★★
Easy Repair
The item first was easy to find and order. The price is about right. Just remove the old one and install the new one with no trimming or confusion to intall.
Pedro - July 27, 2021
Verified Purchase
★★★★★
★★★★★
Timely service
the parts were the proper parts which made repair quick and easy.
Guest - September 9, 2021
Verified Purchase
★★★★★
★★★★★
Perfect Match
Yes, great service and worked great. Need to order another part for a different appliance and will use eReplacement Parts for certain.
Guest - May 10, 2022
Verified Purchase
★★★★★
★★★★★
Great parts
Great condition
Thanks
John - September 19, 2023
Verified Purchase
★★★★★
★★★★★
it worked great
got my weed eater back up and running
Guest - May 26, 2019
Verified Purchase
★★★★★
★★★★★
Not exactly the same.
The filter is not like the one I want to replace. The old filter is solid, the new one is cut out in the center.
Guest - May 29, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the air filter cover, then the old filter.
Installed the new filter and replaced the cover.
Removed the old spark plug, Gapped the new plug @ 0.025 and installed it.
I didn\'t need the air filter as one came with the air filter assembly.
A medium with flat head screwdriver will do the job but the appropriate torx wrench just makes it easier. The steps are simple:
1) Remove the filter cover and air filter.
2) Remove three screws holding the assembly to the carbure
... Read moretor. The assembly will simply pull away. There is one small tube attached to the backside of the assembly... disconnect this.
3 Connect this tube to the backside of the new assembly, line the assembly up to the carburetor and put those three screws in place. Put several drops of 30wt motor oil onto new filter and squeeze out the excess. Align the filter in place and put the filter cover on.
4) Celebrate \"another quality job well done\" hehe
1. Removed and replaced the spark plug (don\'t forget to set the proper gap).
2. Used a clothes hanger hook to pull the fuel line and pick up out of the fuel tank, replaced the pick up and reinserted in the tank.
3. Removed the air filter cover and removed the four screws holding the carburetor along with the gasket and O-ri
... Read moreng. Take care separating the carburetor from the fuel line
4. Replaced the O-ring and reattached the carburetor
5. Replaced the air filter gasket, inserted the new air filter, and reinstalled the air filter cover.
Unscrewed air filter housing which holds carb on , replace carb and filter housing installed new air filter. Two screws to remove gas tank removed hoses , replaced hoses and installed both bolts on new gas tank . Four pulls on cord and it was running great. no adjustments to carb at all. Took about 20 min.
Replaced the carguretor, spark plug and air filter. Filled with fresh gasoline. Primed the fuel line. Trimmer started on the second pull of the pull cord.
Trimmer
- MTD String Trimmer Model 41AD604G799 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 753-06085 MTD Air Filter")
_WW_1.gif "Part Location Diagram of 753-06085 MTD Air Filter")
