Part Location Diagram of 532194208 Husqvarna Lawn Mower Cotter Pin
See part J-90 in the diagram
( Grid squares measure 1x1 inch )

Lawn Mower Cotter Pin 532194208

Manufactured by:
Husqvarna
ERP Number:
ERP9016072
Part Number:
532194208
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(19 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Cotter pins are commonly utilized to secure components. It an identical replacement for a missing or a damaged part that was installed on a new unit. This authentic manufacturer-supplied cotter pin is specially made for use with Craftsman lawn and garden equipment. One durable metal part is included. Make sure to refer to the owner\'s manual and the appropriate diagrams for your model to ensure the proper repair procedure. You may need pliers to perform this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
  • Weed Eater
  • Craftsman
  • Ariens
  • RedMax
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
  • Lawn Tractor Accessories
Part# 532194208 replaces these:
532194208, 539194208,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(9 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    2
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(19 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Front mower lift link bent

Stephen from MOUNT VERNON, Indiana

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Dropped mower deck & replaced parts. Mower deck back in place
Did you find this story helpful?
Thank you for voting!

Mower deck wouldn\'t adjust correct

Russell from BATES CITY, Missouri

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench (Adjustable), Wrench set
Parts Used:
581506903, 819191912, 532194208
Removed old link lift.
Replaced with new link lift.
To lift the deck off the ground I used a brick.
Easy repair
Did you find this story helpful?
Thank you for voting!

Anti sway rod became detached and was bent by dragging under the mowing deck.

Richard from Marshall, Virginia

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
596134901, 532404851, 532194208
Inserted one end into the bracket/plate attached directly to the mower body and the other to the mowing deck, adding the washer and cotter pin.
The biggest hassle was the fact that I couldn\'t find any on-line \'blow-up\' drawings of the actual assembly since the mowing deck was described in one drawing the the body of the tractor w as on another and the rod was sort of shown, but without dotted lines or anything else showing exactly where it needed to go. Fortunately, the Husqvarna dealer where I purchased it was only about a 20 minute drive away, so I was able to look at another mower and figure out how it was supposed to attach.
Did you find this story helpful?
Thank you for voting!

Bar holding mow deck up in front came off.

Jeremy from DECATUR, Illinois

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1. Friend has the same model, older year. Took pictures of how it should look.
2. Found the part numbers in the owner\'s manual and ordered.
3. Using the previously taken pictures, replaced the parts.
4. Up & running again in no time with no other issues.
Did you find this story helpful?
Thank you for voting!

Link lift susp. broke

Paul from New Port Richey, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
581506903, 819191912, 532194208
Lifted front of mower with lift,lowered the mower deck to number 1 position,raised the deck and placed on support. Then attached the link lift susp. to the support on the mower and secured it with the washer and pin cotter.
Did you find this story helpful?
Thank you for voting!

Suspension arm on the deck broke.

Michael from Clermont, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Unhooked the deck from the tractor, installed the suspension arm and then rehooked the deck to the tractor.
Did you find this story helpful?
Thank you for voting!

Poulan Pro PB19546LT Riding Mower- Replace Mower Deck Belt and Motion drive Belt- Replaced lost Front Mower Lift Link Suspension rod.

Kenneth from Lebanon, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
The most difficult part after removing the mowing deck was the R&R of the motion belt. Even after raising the entire mower up on jack stands and crawling under the thing, trying to get that belt off seemed about impossible to see or reach at the transmission end, UNTIL, I removed the under seat battery and battery box. Then you could see and reach down onto the belt and remove it in the back. The front end, on the motor shaft, top pulley, \'looked\' impossible to take off too because the belt keepers seemed to be fastened to the deck at both ends, so I cut belt in two, then it came off - easy. Now to put the new belt back on seemed impossible too. Finally I saw that the keepers were springy and were only fastened at one end so the belt could be worked around them. Not easy but it worked out. Later to remove the blades to sharpen, it takes a long handled extension to loosen the blade nut.To keep the blade from turning while trying to unloosen the nut I used the deep throat vise grips and locked it onto the mower deck edge as a stop so that the blade could not keep going. Two final things. I find that a belt sander does a far better sharpening job than a grind stone. Less material removed. Plus,
My Front Mower Lift Link Suspension rod that adjust the front deck height just disappeared because the deck end spring cotter key come off. I noticed that on the new rod a hole is drilled up close to the adjuster nuts. And a long spring lock cotter key goes thru it to prevent the rod from sliding out the front side of the bracket to get lost. All of this took 5 hours. I have all kinds of tools and reasonable know how. But the Poulan operator manual seems written loosely.
Did you find this story helpful?
Thank you for voting!

Riding mower front lift bar fell off and wash out port broke

Thomas from Auburn, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1. Pry up mower deck and support with blocks
2. Connect support bar to front of rider mower and bracket on mower deck make sure cotter pin is on on both ends of rod with washer.
Did you find this story helpful?
Thank you for voting!

Front mower lift link part had broken.

Lois from Anderson, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
581506903, 819191912, 532194208
Since the other front mower lift link had broken in two pieces I didn\'t have to remove the old part. I looked on youtube to make sure i was putting the part back into the proper spot.
This was very easy. Once I put the part in the proper hole under the front and slid the other
end into it\'s proper hole on the deck, put the w asher and cotter pin back in. Mower is working just fine..
Did you find this story helpful?
Thank you for voting!

Changed lift lever for mower deck on garden tractor and both cutting blades.

Jerry from Clinton, Louisiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set
Removed old mower deck lift bar and adjusted for height; changed both cutting blades on Husqvarna lawn tractor.

I received better quality parts from eReplacement Parts than from my previous supplier. I have replaced blades several times over the last few years, and these were noticeably better steel. Quick shipping and grea t packaging. This is my new vendor.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9016072
Manufacturer Part Number: 532194208
Brand Model Number Description
Poulan 11597 Lawn Mower - Lawn Tractor
Husqvarna 12530 Lawn Tractor - Pxt Tractor
Husqvarna 142R Brush Cutter - 142 R (20001900001-Current)
Husqvarna 143RII Brush Cutter - 143 Rii (20150400001-20180500000)
Husqvarna 150BT Leaf Blower / Vacuum - 150 Bt (20071800001-20084000000)
Husqvarna 1538 Lawn Tractor - Ride Mower
Husqvarna 1542XP Lawn Tractor - (T) (96043000602) (2006-10) Ride Mower
Husqvarna 1542XPT Lawn Tractor - Ride Mower
Husqvarna 164T Lawn Tractor - Cth Tractor
Husqvarna 1848XPT Lawn Tractor - Ride Mower
Husqvarna 184T Lawn Tractor - Cth Tractor
Husqvarna 2042 Lawn Tractor - Ride Mower
Husqvarna 2042LS Lawn Tractor - Ride Mower
Husqvarna 20B42T Lawn Tractor - Ride Mower
Husqvarna 20F42T Lawn Tractor - Ride Mower
Husqvarna 20K46 Lawn Tractor - Ride Mower
Husqvarna 2146XLS Lawn Mower - Husqvarna Lawn Mower Model 2146XLS Parts
Husqvarna 2146XP Lawn Tractor - Ride Mower
Husqvarna 2242T Lawn Tractor - Ride Mower
Husqvarna 2246 Lawn Tractor - Ride Mower
Husqvarna 2246LS Lawn Tractor - Ride Mower
Husqvarna 224T Lawn Tractor - Yth Tractor
Husqvarna 224TFI Lawn Tractor - Yth Tractor
Husqvarna 2346XLS Lawn Tractor - Ride Mower
Husqvarna 2348 Lawn Tractor - Ride Mower
Husqvarna 2348LS Lawn Tractor - Ride Mower
Husqvarna 2354GXLS Lawn Mower - Husqvarna Lawn Mower Model 2354GXLS Parts
Husqvarna 236R Brush Cutter - 236 R (20200400001-Current)
Husqvarna 240442 Lawn Mower - Husqvarna Lawn Mower Model 240442 Parts
Husqvarna 240443 Lawn Mower - Husqvarna Lawn Mower Model 240443 Parts