This authentic replacement part is sourced directly from original equipment manufacturer. This blade is designed for use with riding lawn mowers/tractors. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulch since the smaller clippings will decompose more quickly, releasing their nutrients into the soil. This part is made out of metal and it is sold individually. To replace it you would need a wrench to remove the nut that secure the blade.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
As Described
Pleased with purchase
Sean - July 8, 2019
Verified Purchase
★★★★★
★★★★★
GREAT PART, EASY TO INSTALL
PARTS WERE EXACT FIT, EASY TO REPLACE OLD PARTS. PARTS RECEIVED QUICKLY.
Guest - July 10, 2021
Verified Purchase
★★★★★
★★★★★
Very pleased with mower blades
Excellent service. Fast delivery and arrived in good condition. Installed them the same day and working as they should.
Raleigh - June 2, 2022
Verified Purchase
★★★★★
★★★★★
Need three
I was the go between to order parts. I didn’t realize that three blades were needed to replace the old blades. The service representative should be able to tell the number of blades needed upon request by customer. Otherwise, everything is great.
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
Shipping took over 1 1/2 months
Good product. Shipping took wAy to long!
Kerry - December 23, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(9 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
I ordered the three bagging blades that the parts manual suggested. A mulching blade was in this order that I did not order and was charged for. I will be returning this blade.
Replaced the part to which the blades were connected as well as the blades.
Rolled the lawnmower onto ramps and two concrete blocks for each tire to have space to work. took off damaged blades and replaced them. The parts were correct.
Did you find this story helpful?
Thank you for voting!
replaced broken Mandrel and used self tapping bolts
Used Impact wrench to remove broken mandrel bolts. Used Impact wrench to install new self tapping bolts to mount new Mandrel. It only took 5min to complete repairs and install a new blade.
Did you find this story helpful?
Thank you for voting!
Spun out the end of one shaft and hit rock which broke mandrill housing
Pulled the cutting deck completely out from under mower so I could access the spindles, blades and mandrel assembly. Once mower deck was removed from the tractor underside note how the belt is routed. This will make it easier when reassembling. Pretty straight forward repair. Remove the four bolts holding the damaged mandrel and the mandr
... Read moreel that had a shaft end spun out. You will need to remove the pulling from the mandrels. I just gently tapped my off but if you have a puller that will make it easier. Replace the new mandrel by reversing the steps. The shaft had to be tapped out but it was simple and the old bearing came out with the old shaft. Place new bearing on shaft and reinstall. Very easy process. Installed the new blades, remounted the mower deck to tractor and started cutting grass.
Remove the mower deck
Turn over mower deck
Remove old blades
Install new blades
Move mower deck below tractor
Reconnect belt
Reattach mower deck to tractor on the five connecting pins.
Removed old blades (3) and broken mandrel.
Installed new mandrel, with 4 new self tapping bolts.
Installed 3 new mower blades.
Slid mower deck under tractor and connected linkages.
Installed drive belt, and adjusted mower deck linkages.
Test ran, and celebrated.
Lifted the front of the mower and put blocks below it.
Remove the blade nuts from the shaft, then remove the blades
Clean the underside of the deck
Place the blade on the spindles and tighten the blade nuts
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9015566
Manufacturer Part Number: 532187255
Lawn Mower
- Husqvarna Lawn Mower Model 96023000200 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(2008-01)_WW_6.gif "Part Location Diagram of 532187255 Husqvarna Lawn Mower Mulching Blade")
_(2008-01)_WW_6.gif "Part Location Diagram of 532187255 Husqvarna Lawn Mower Mulching Blade")
