It is a genuine manufacturer-approved part which is specially designed for Ryobi and Husqvarna riding lawn mowers and garden tractors. The purpose of the switch-interlock is to act as a safety feature which will shut the engine off when equipment is started or running in unsafe operating conditions. Unfortunately, over time parts will wear out and it may begin to fail eventually requiring a replacement. Refer to the owner\'s manual and the appropriate diagrams for your model for the correct location and installation of this component. Note, this high-quality plastic body interlock switch is sold individually. You will need a screwdriver to perform this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
New idler pulleys
Parts came on time , they fit perfectly I am happy with the quality and the price. Bob Lium
Guest - August 3, 2019
Verified Purchase
★★★★★
★★★★★
Worked great
Back in business.thanks
Guest - August 28, 2019
Verified Purchase
★★★★★
★★★★★
Excellent
The staff is knowledgeable and efficient and parts arrive in a very timely manner I tell my Engineer friends on the way to go
Guest - March 18, 2020
Verified Purchase
★★★★★
★★★★★
Great service!! Easy
Parts was exactly what I ordered, came quickly, and fixed my problem right away!! Thank you.
Guest - April 26, 2020
Verified Purchase
★★★★★
★★★★★
Great parts Great Service!
Great Part Fit Perfectly, Part Arrived Very Fast, Great Customer Service that was so helpful, The only place we will buy parts from now on! Really Cares about the Customers need!
Robert - May 21, 2020
Verified Purchase
★★★★★
★★★★★
Part worked fine
Parts arrived as expected. Wish it did not take so long, but shipped from Utah to PA. Reasonable time for the distance. And repair complete.
Guest - August 3, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Right part right price fast friendly customer service nice to talk to humans
Guest - August 18, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Fit perfectly.
Guest - November 11, 2020
Verified Purchase
★★★★★
★★★★★
Deck Safety Switch
The blades would not engage when PTO switch was activated. Unit would stall as a safety precaution. I was quite difficult to access due to manufactures placement. Works well again now.
Theodore - February 20, 2021
Verified Purchase
★★★★★
★★★★★
Part worked great.
The part arrived quickly and I am very happy with the service.will definitely use E parts for all my parts.
Guest - May 13, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed hood side plate, mower deck, two rods to access switch. Break tabs on switch to remove. Put all back together,worked great. Thanks for your help.
When you order your blades, the items shows a 38 inch blade but the price is for just one blade. Had to order another blade but all went well on the repair. Replaced blades with a wrench and a good strong hand. Used a screw driver to slip the old switch out and replace with the new one.
Helps to remove gas tank, (one on each side of tank) lay that to one side. Move blade lever to upright position and lock it in. Remove connection from bottom of switch. (Pry out lock tab outward with thumb or small screwdriver and pull down). With channel lock pliers squeeze both tabs in and push up to remove switch. Repeat procedure in r
... Read moreeverse to re- install switch. About 15 minutes. time to complete.
Read less
Did you find this story helpful?
Thank you for voting!
It wouldn\'t do anything when key was turned in the crank position.
After installing all the safety switches and still nothing, I noticed that the voltage meter wasn\'t moving when I turned the key so I reached my hand back to wiggle the wires and it cranked right up. I guess it had grounded the mower.
Did you find this story helpful?
Thank you for voting!
Lawn mower would not start. No spark noted during diagnosis.
Removed the engine shroud on top of the engine. Ignitions and diode immediately underneath with. 5 bolts loosened freeing the ignitions and diode. Ereplacenent makes it very easy to order parts at reasonable prices.
I had to do some testing to determine which switch was bad. Turned out to be the blade switch. Extra time was for testing and the fact that you have to remove the battery and its tray to get at the brake/clutch switch to test it. It works now. Yay
Removed two interfering parts that were above the mower deck so i could remove interlock switch, then easily removed the switch, and installed the new switch. plugged in electric harness, refastened interfering parts.
Remove wiring from switch careful not to break the locking mechanism.
Squeeze tabs and push part through itÆs mounting hole. It will not go all the way thru.
Make sure to have clutch/brake pedal locked in the set position.
Now reach up and wiggle it out of it position.
Assembly is the reverse of removal.
Did you find this story helpful?
Thank you for voting!
Interlocking switch shorted and so did the seat switch
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
