This is a Genuine OEM sourced replacement part used on Black and Decker Lawn Mowers. This part is made out of Metal and it is Sold Individually. Mulching lawn mower blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulch since the smaller clippings will decompose more quickly, releasing their nutrients into the soil.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
OEM-part better than what else is on the market
Perfect fit compared to the "universal replacement" non-OEM "stuff" on the general hardware market. Wasted my time looking all over. Should have gone directly to e-replacement. They never let me down.
John - May 8, 2019
Verified Purchase
★★★★★
★★★★★
Awesome & affordable part
I've been shopping for this blade & finally located it on your website. My mower is like new. Thank you so much!
Guest - June 23, 2019
Verified Purchase
★★★★★
★★★★★
Just what was needed
Well the lawnmower is already 5 years old, so the blade was less than good. Sharpening didn't help much as the OE blade had many nicks and warps. Then I found you guys, and voila, problem solved! Installed in a breeze, works like a charm. Thanks
Guest - July 22, 2019
Verified Purchase
★★★★★
★★★★★
Easy ordering & fast delivery!
I ordered a new mulching blade for my mower, and I received a blade that was an exact fit!!!
Dennis - May 4, 2021
Verified Purchase
★★★★★
★★★★★
The part was the correct replacement blade.
The part was in excellent condition and worked accordingly.
Guest - May 14, 2021
Verified Purchase
★★★★★
★★★★★
replacement blade for my BLACK AND DECKER 875 MM electric mulching mower
Blade arrived quickly and was a great fit that was very easy to install. I will order from this supplier again when I need other parts.
Guest - August 21, 2021
Verified Purchase
★★★★★
★★★★★
Straightforward service and appears to be a quality product.
Arrived quickly and exactly as advertised. I’ve yet to test them, but the mower blades look good and seem to be what I wanted.
Guest - September 22, 2021
Verified Purchase
★★★★★
★★★★★
Fast service!
Great service, blade fit perfectly.
Good seller!
Guest - March 16, 2024
Verified Purchase
★★★★★
★★★★★
Easy deal
Although the part was wrong, the experience was good. Easy order easy return fast refund. Pleasant employees. I will use your service again
Guest - August 4, 2021
Verified Purchase
★★★★★
★★★★★
Good Replacement - NOT OEM = its NOT a Mulching Blade
Good Blade, NOT Original Equipment of Manufacture
NOT a Mulching Blade.
It cuts just fine!
Guest - July 7, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Battery replacement by simply lifting release lever on top of mower. Lift out old battery and drop in new one. Re-latch the safety lever. Charge the battery.
Blade replacement: Disconnect battery by unlatching it and lifting it out of the battery recess. Use a glove or rag to hold sharp blade, loosen mounting bolt and then remove bo
... Read morelt, the blade insulator, and the spacer (square washers) to remove old blade. Reassemble in reverse order with new blade (Note: Ensure the side of the blade that is supposed to be facing the grass is facing out on the shaft).
Read less
Did you find this story helpful?
Thank you for voting!
Mower blade needed replacing so did the rear flap.
Used adjustable wrench to take off the nut to remove old mower blade and install the new blade. I used a phillips screwdriver to loosen rear axle brackets to lower axle in order to replace rear flap. I was careful not to loosen the height adjustment parts on the right rear wheel. Needed a rubber mallet to loosen old torn flap to remove.
Place a block of wood in the housing to stop the blade
Remove the nut holding the blade, blade insulator and spacer
Install the new blade on the spindle, with the space and insulator
Tighten them with the nut
Straight forward:
1) Remove nut holding blade to drive shaft. NOTE WHICH DIRECTION BLADE, INSULATOR, AND NUT FACE (motor or ground)
2) place new parts on drive shaft facing the correct direction)
3) replace nut
With battery disconnected turned the mower over, placed a block of wood between housing and blade to provide stop for blade moving, then with wrench removed blade and replaced with new blade
1 replaced the blade first. Simple thing to do. Lock lower square nut in place, remove top nut and replace blade. retighten top nut and your finished.
2. lower handles a little bit harder to do. Remove both lower screws holding on handles and remove right handle first (it\'s the easiest). Left handle a little more difficult since th
... Read moreere is a tension spring wrapped around the lower part on the handle. You will have to pry it loose & hold on to it while you remove and replace the lower handle. Make sure to replace tension spring around new handle and then tighten everything back up.
After tipping the mower onto its side which was easy as it is an electric mower so no gas issues.
I removed the old blade using my socket set and a block of wood to keep the blade from spinning
balanced the new blade
making certain to have the \"grass side\" facing outward I installed \\
I lined up spacers and wit
... Read moreh my socket set tightened it in place
Ran mower to be certain is was tight and proceeded to mow lawns
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18988238
Manufacturer Part Number: 90541433-01
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
