This is a Genuine Manufacturer Approved replacement Spacer for a Blade used on certain Black and Decker Lawn Mowers. It is made out of Metal and is Sold Individually. This Spacer sits on top of the Fan and it allows it to spin freely and with less friction.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ideal part. Delivered quickly.
It's the part I expected to get but the service from eReplacement Parts is unexpectedly prompt. Thanks for the quick service.
Peter - August 5, 2019
Verified Purchase
★★★★★
★★★★★
Ordered 5 parts. Got 2 and 1 was wrong.
Totally wrong order. Goodbye
Martin - April 14, 2020
Verified Purchase
★★★★★
★★★★★
Mower Blade Spacer
The part was a perfect replacement and shipping was fast. Thank you ereplacementparts!
Richard - June 19, 2020
Verified Purchase
★★★★★
★★★★★
Easy to put on
fit great fast delivery
Guest - June 19, 2020
Verified Purchase
★★★★★
★★★★★
Exact replacement
Fit perfect!
Guest - July 2, 2025
Verified Purchase
★★★★★
★★★★★
Super service by RP. just the pesky international postal puzzle.
great to get these parts precisely what was needed, at a nice parts price and got my old mower working. Shipping: well, now.... not the vendor's fault, butg took almost a month. by air, mostly. from Utah, los angeles, then Denver, then Toronto, then Winnipeg. Reporting by usps was precise. many airport steps all the way. Golly....... the word 'departed' made a great pun this month. Great to know the parts suppliers are still there.
Iglobal - June 26, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Last summer I took the blade off to sharpen. I didn\'t give enough attention on how the items on the blade/fan shaft went back together, which resulted with the blade not being secure, and untimely being out of balance, which damaged the fan. I decided to replace everything on the blade/fan shaft.
Starting closest to the mower, I r
... Read moreeplaced the Spacer, no problem there. Next was the Fan, once again, no problem. Followed by the Blade, and it tells you what side should face the ground written right on it. Now, this is the point where you need to pay attention. What is next is called an Insulator followed by another spacer. The insulator has ridges on each side of it, that will straddle the blade on one side, and the metal spacer on the other side. Each have a oval hole in the center and you need to make sure each is pushed far enough on to the shaft to fit snugly on the oval part of the shaft. The tricky part for me was to keep everything lined up and inside of the ridges, plus keeping everything pushed up on the shaft to expose the threads for the Hex Nut to get started. Once the Hex Nut is started, the only thing you need to do at that point is to make sure everything stays lined up as you tighten the Hex Nut. As you tighten Hex Nut, and the blade and insulator and the metal spacer become not aligned, loosen the Hex Nut enough to get everything back in line and start tightening again. Hope this helps.
I removed the blade nut with an impact wrench. Then removed the spacer, insulator and blade. I was able to pry the fan off of the shaft. I replace the blade spacer above the fan. With deep socket I was able to tap the fan back in the same place as the old one. I replaced the blade, insulator and spacer. Then tightened the blade bolt with
... Read morea socket wrench by wedging a 2x4 to hold the blade.
Read less
Did you find this story helpful?
Thank you for voting!
Fan and spacer were damaged, and the blade was not engaged with the drive mechanism. It was just spinning freely.
Removed the fan, spacers and blade and associated components on the shaft, and replaced them all in the reverse sequence from which they were removed. Only needed one wrench to do the job.
Side note: I was ready to throw the mower away during the annual citywide curbside pickup day, until I took one last look. All 6 parts I
... Read moreneeded to replace were easily found on eReplacementParts.
This mower should be good for another 15 years!
Very pleased!
Read less
Did you find this story helpful?
Thank you for voting!
Nothing was wrong at all. It worked right the first try
1. Used Channel Lock pliers to hold the spacer
2. Turned the hex nut counter clockwise to loosen and remove the hex nut.
3. Removed all of the old parts.
4. Replaced old parts in the same order with the new parts
5. Gripped the spacer with the channel lock pliers.
6. Tightened the hex nut till tight.
Removed old blade and parts and inserted new ones. Tightened the new nut. I had not tightened it enough and blade became loose while moving. I had not replaced the spacer correctly so I took everything off and retightened. This time it worked. However, I am now convinced that I should just give an eye inspection to the mower before I star
... Read moret it.
1. Removed nut.
2. Removed spacer, insulator, fan.
3. Replaced parts in reverse order.
4. I looked at the exploded diagram on the parts ordering page to be sure I put the parts back in correct order. Print screen that when you order your parts. Make sure you are looking at the correct model and version number.
Removed bolt holding blade and removed: blade, fan and blade spacer.
Installed new blade spacer, fan, blade, and hex nut.
Done! Super easy, and the parts were perfect. Should have done this years ago.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18985774
Manufacturer Part Number: 680812-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
