Disassembled and found a bad bearing also. The bad bearing had also damaged the shaft.
Fan Housing not available - original cracked but usable. Used snap ring pliers to remove snap ring over bearings. Used 1/2\" drive socket that fit the bearings and used bench vice to press old bearings out. Note: Save the spacer between th
... Read moree bearings for reassembly. Had problem putting new shaft through new bearings. Sanded shaft lightly until fit was adequate and lubed the shaft and bearings to aid in the assembly process. Used socket and vice to press shaft through installed bearings. Used hammer and socket to gently center the bearings on the shaft and housing for best rotation. Easily done. The new fan blade fit to the new shaft was also a bit tight but with some careful and gently tapping it went on and the screw pulled it into place. Remainder of the assembly was straight forward.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18982040
Manufacturer Part Number: 5140086-69
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/power-tool/sander-polisher/caps-and-lids/"},{"position":2,"name":"5140086-69","title":"5140086-69","url":""}]
