Part Location Diagram of 1125757 Abu Garcia Drag Washer
See part 38 in the diagram
( Grid squares measure 1x1 inch )

Drag Washer 1125757

Manufactured by:
Abu Garcia
ERP Number:
ERP18258001
Part Number:
1125757
Original Equipment Manufacturer ?
$5.95
Special Order
Minimum Quantity of 2 required

A Bit Difficult 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This authentic part is sourced directly from the original equipment manufacturer for use with Abu Garcia fishing reels. The purpose of this washer is to control the drag of the line. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality drag washer is made of durable composite material and is sold individually.

Troubleshooting

This part works with the following brands:
  • Abu Garcia
  • Pflueger
This part works with the following products:
  • Baitcast Reels

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Drag malfunctioned, handle nut cracked.

Roger from Tampa, Florida

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
1252075, 1190698, 1125785, 1125757
NOTE: Take photos of each step for easy reassembly

1. Disassembled the reel.
2. Cleaned old oil and grease.
3. Replaced the drag washers.
4. Lubricated with new oil and grease.
5. Reassembled the reel.
Did you find this story helpful?
Thank you for voting!

The drag washers were worn out.

Keith from Benton, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
1190698, 1125757
Remove crank handle retainer, then crank handle,
Remove spring washer, star drag handle,remove side plate screws, carefully remove side plate, remove shims or spring washer, remove drag stack, remove drive gear and drag washer under gear, clean everything up, light solvent,reassemble in reverse order,use cals drag grease on drag was hers as per manufactures recommendation, lightly grease gear teeth, reassemble reel, start tightening drag and slipping drag to get all the drag grease spread evenly, tighten drag to line wt.
Did you find this story helpful?
Thank you for voting!

Worn out drag washer & lost friction & rubber washer

john from birmingham, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
1125771, 1125770, 1125757
Disassemble reel, completely clean, replace parts, reassemble.
Did you find this story helpful?
Thank you for voting!
  • 1