This is a Genuine OEM sourced replacement part designed for Shimano Reels. It is made out of Metal and it is Sold Individually. It helps to distribute the pressure evenly and provides a tight seal for the connecting pieces inside the reel. Replacing this Washer you would need a Screwdriver.
I disassembled the reel and laid each piece out in the order they came off the reel. The work was done over a large towel laid on the work surface to prevent a dropped part from bouncing off the table to the floor. Each part and the reel case was cleaned with cotton swabs and rubbing alcohol and oiled with Shimano brand oil and drag greas
... Read moree. The reel was re-assembled in the correct order and part orientation. Some parts could be placed back in the reel in the wrong orientation(upside down) so be sure to note this when you pull them out of the reel.
It is very helpful to have a schematic of your reel at hand for reference when you put the reel back together.
The reel now works as it did new.
Removed handle and side plate to expose the parts that were worn. Removed drive gear and drag assembly. Removed idler gear and level wind shaft. Installed new parts and reversed the sequence.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
