Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
16463468-1-M-Husky-946-04112A-Cable-control Fwd
Part Location Diagram of 946-04112A Husky Cable-control Fwd
See part 50 in the diagram
( Grid squares measure 1x1 inch )
16463468-1-S-Husky-946-04112A-Cable-control Fwd Part Location Diagram of 946-04112A Husky Cable-control Fwd

Cable-control Fwd 946-04112A

Manufactured by:
Husky
ERP Number:
ERP16463468
Part Number:
946-04112A
Original Equipment Manufacturer ?
$46.27
★★★★★
★★★★★
5 Reviews
Special Order

Easy 

15 - 30 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a genuine manufacturer-supplied component which is specially designed for walk-behind lawn mowers. The drive cable stops the engine when you let go of the handle. When the brake cable is damaged or broken, the mower becomes temporarily inoperable so the cable needs to be replaced. This high-quality rubber insulated drive cable is sold individually. Please make sure to check the owners manual and the diagrams of your model for the correct installation of the new component. You may need a screwdriver and pliers to perform this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Yard Man
  • Troy-Bilt
  • MTD
  • Yard Machines
  • Husky
This part works with the following products:
  • Lawn Mower
Part# 946-04112A replaces these:
746-04112, 746-04112A, 946-04112A,
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect fit on an older mower!
Arrived quickly and fit perfectly on my old Troybilt walk behind. In the past i'd have to find something close and modify it. Great to just unwrap and install!
Guest - September 9, 2019
Verified Purchase
★★★★★
★★★★★
Great value
Just what I needed, works greag
Guest - April 21, 2020
Verified Purchase
★★★★★
★★★★★
easy repair
took 15 min to replace.
Norman - July 14, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair and no left over parts. Worked great.
The parts that I received worked great and easy to put together and install.
Guest - September 17, 2020
Verified Purchase
★★★★★
★★★★★
Fixed it
Right part, easy fix. Arrived on time.
Guest - June 18, 2022
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The cable became rusted.

Garth from Roswell, New Mexico

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
946-04112A
I used 1/4\" copper tubing to remove the ignition cable. The I used a screwdriver to remove the clutch cable. The shorter copper tubing was used to remove the clutch control then reassembled.

Did you find this story helpful?
Thank you for voting!

The Drive belt and the drive cable needed to be replaced.

Randal from Rocklin, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
946-04112A, 954-0637A
1. I cleaned out the drive belt housing and pulleys.
2. I removed the old drive cable.
3. I installed the new drive belt.
4. I installed the new cable.
I just worked until I figured out how to go about each part of the work.
Did you find this story helpful?
Thank you for voting!

Drive cable replaced/works like-new!

Jay from HOWELL, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
946-04112A
Replaced drive-cable /from old drive-cable (broken) from years of used!....
Did you find this story helpful?
Thank you for voting!

Snapped cable.

James from Fredericksburg , Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
946-04112A
It is a very easy job, just disconnected one end of the old cable and attached the new one. Did the same for the other end. Done!
Did you find this story helpful?
Thank you for voting!

Cables were frozen. Front wheels were bare (self propelled didn\'t work too good)

Jason from Dougalsville, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
734-04018C, 946-04112A, 946-1132
Replaced the cables, and replaced the wheels. Had to do some disassembly of the front of the mower to expose the mechanism for the self propelled. Also, I suggest replacing both cables at once. The drive engage has a bracket that holds the engine control. I mistakenly replace the engine control first and then had to undo it to replace the drive control (which has the bracket for the other built in). Anyway, if you do both at once, you shouldn\'t have a problem.
Read less
Did you find this story helpful?
Thank you for voting!

Drive cable broke

Larry from PLANO, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
946-04112A
Removed old cable, replaced with new one
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16463468
Manufacturer Part Number: 946-04112A
Brand Model Number Description
Yard Man 12A-445C701 Lawn Mower - Lawn Mower
Yard Man 12A-445D701 Lawn Mower - Lawn Mower
MTD 12a-445e755 Lawn Mower - Walk-Behind Lawn Mower
Yard Machines 12A-446M729 Lawn Mower - Lawn Mower
Yard Man 12A-449C755 Lawn Mower - Lawn Mower
MTD 12A-449R729 Lawn Mower - 21" Rotary Mower
MTD 12A-453E700 Lawn Mower - Lawn Mower
MTD 12A-465E790 Lawn Mower - Lawn Mower
Troy-Bilt 12A-466A711 Lawn Mower - Walk-Behind Mower
Troy-Bilt 12A-469R766 Lawn Mower - Walk-Behind Mower
Yard Man 12A-556Q713 Lawn Mower - Lawn Mower
MTD 12A-565E790 Lawn Mower - Lawn Mower
Yard Man 12A-565I701 Lawn Mower - Lawn Mower
Troy-Bilt 12A-566N711 Lawn Mower - Tuff-Cut 210 Walk-Behind Mower
Troy-Bilt 12A-566N766 Lawn Mower - Tuff-Cut 210 Walk-Behind Mower
Yard Man 12A-567A796 Lawn Mower - Lawn Mower
Yard Man 12A-568Q701 Lawn Mower - Lawn Mower
Yard Man 12A-568Q755 Lawn Mower - Lawn Mower
Husky 12A-569K730 Lawn Mower - Lawn Mower
Husky 12A-569K731 Lawn Mower - Lawn Mower
Yard Man 12A-569P701 Lawn Mower - Lawn Mower
Husky 12A-569R731 Lawn Mower - Lawn Mower
Yard Man 12AE445G701 Lawn Mower - Lawn Mower
Troy-Bilt 469 Lawn Mower - Lawn Mower
Cable-control Fwd
$ 46.27
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖