This is an authentic ignition coil designed for use with Husqvarna handheld gas powered leaf blowers. It is sourced directly from original equipment manufacturer and it is sold individually. The purpose of this item is to deliver electric current to the spark plug. Please note, this assembly includes a rubber spark plug boot. To complete this repair you would need screwdriver set.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Blower woes!
The part was exactly as described. Unfortunately it did not solve my problem even though I was told by a repair shop that it was the fix.
Great service from you guys as always.
Thanks
Guest - July 27, 2019
Verified Purchase
★★★★★
★★★★★
I give the service and the part a 10 excellent
The part came properly packed and in the original configuration as the manufacturer's piece. Part is working fine. Thanks for your service
Guest - September 27, 2019
Verified Purchase
★★★★★
★★★★★
easy repair
All parts were received in good condition
Guest - December 9, 2019
Verified Purchase
★★★★★
★★★★★
Replacement part
Part fit and worked perfectly!!!
Guest - December 17, 2020
Verified Purchase
★★★★★
★★★★★
Great service
Excellent service, worked great
Guest - October 19, 2021
Verified Purchase
★★★★★
★★★★★
easy repair
Part was exactly what I needed
Guest - May 4, 2023
Verified Purchase
★★★★★
★★★★★
Coil replacement
It was perfect. It was it what I needed. But I wish you guys would have more of the obsolete parts
Guest - July 3, 2024
Verified Purchase
★★★★★
★★★★★
Suitable replacement
The ignition coil is great. The spark plug end is larger then the one on the original coil, so it was hard to get to fit properly. Otherwise works great. Thanks
Guest - October 4, 2023
Verified Purchase
★★★★★
★★★★★
Fixed the problem
The item is exact match for original part. Great price. Quick shipping...Thank you!
Guest - May 8, 2020
Verified Purchase
★★★★★
★★★★★
Wrong part listed for my Husky 150 bt backpack blower along with wrong price.
Wrong part listed on your website - I had to return part and order somewhere else with 2 weeks lost. I will never order from these people again.
Pitifully poor customer service don't waste your time.
Guest - November 13, 2021
Verified Purchase
November 13, 2021
Hi Thomas,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed starter rope coil assembly (4 screws) then right side cover (4 screws) noting how trigger is installed. Remove 2 screws holding coil but first note how old coil is installed. Remove connecting wire. Then replace coil and put back together. I gapped the distance between the coil and flywheel magnets using a business card. This
... Read moreis second replacement coil for this blower. They seem to last about 2 years. If blower doesn\'t fire at all, it is probably the coil.
1. Remove cover with star wrench
2. Remove switch from blower housing
3. Remove wires from switch
4. Replace switch and reconnect wires
5. Remove wire from ignition coil
6. Remove ignition coil with star wrench
7. Attach new ignition coil and connect wire
8. Reassemble and start!
Did you find this story helpful?
Thank you for voting!
Miss fire. Repair shop recommendation was to destroy and replace
Disconnect spark plug
Remove cover
Measure space between flywheel and coil pack sensor using feeler gauge
Remove and replace coil pack. Reset gap with feeler gage. Tighten
Replace cover and reconnect the plug wire.
Started and adjusted carb.
Removed the pull rope coil 4 torx screws
took out remaining torx screws to split the plastic case
Took big pipe air comes out of off ( probably didn\'t have too)
Checked the gap between the old coil and the fly wheel(mine was about .006 so that is what I set the new one too
I took a piece of sand paper and cleaned
... Read moreup the top of the flywheel to get rid of rust and build up on the flywheel
Two smaller torx screws attach the coil, they need to come off and the wire with the slide on connector Ned\'s to come off
Then replace the coil snugly but not tight so you can set the gap for both sides of the coil
When you have the gap set tighten and recheck the gap
Put it back together in reverse order
I put an extra twist on my pull start rope so that it pulls back into place quicker while it was apart this far
1. Removed the starter/pull cord assembly from the flywheel/blower housing (4 hex head screws)
2. Removed the \"Cover-Motor housing\" (Part No. 545108802)
3. Removed defunct ignition coil (2 Torx head screws)
4. Installed new ignition coil using the zoo membership card to set the gap between the ignition coil\'s points a
... Read morend the flywheel
5. Reattached the starter/pull cord assembly
Removed recoil starter and cover
Removed sparkplug wire from plug
Removed coil
Installed new coil, leave screws snug but not tight
Using matchbox cover, set coil to flywheel gap
Tighten screws
Replace starter and cover
Install plug wire
Removed starter rope housing and housing below it, removed wires from old coil , put new coil in place, used business card to set clearance between coil and flywheel, put wires in place, removed business card, replaced housings. Put plug wire on, pulled and she fired up. Air filter removed knob then housing then filter put in new filter,
... Read more replaced housing and knob.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16374339
Manufacturer Part Number: 585836101
Leaf Blower / Vacuum
- Husqvarna Leaf Blower Model HVA125BX Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
