This is an authentic OEM sourced item, not an aftermarket imitation. It is specially made for Ridgid and Ryobi table saws. This wrench allows you to secure or remove a saw blade. Angular profile of this item makes tightening and loosening of the blade nut extremely easy.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
great part
original brand ,great price
Guest - December 9, 2020
Verified Purchase
★★★★★
★★★★★
thanks it was the right part...great job
the part was new so no trouble there...great job in finding a fit
Guest - July 15, 2019
Verified Purchase
★★★★★
★★★★★
Wrong wrench
This was the wrong wrench. There was noting listed. Cost too much to return. I would be paying shipping for nothing. Roubi is not represe. very well. The shipment was accurate and timely. The fault was mine but unable to get help from the web site.
Jack - February 18, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Unplug saw from power.
Raise blade to highest point.
Remove yellow guard above blade nut on table top.
Use both wrenches. Saw has left hand threads.
Don\'t over tighten blade nut
Download the user manual, if you need one
Did you find this story helpful?
Thank you for voting!
stripped out nut for blade and bent wrenches to remove blade.
1. Torn down to bear bones
2. Clean off years of rust by soaking in vinegar for 2 days
3. Remove busted bolts and re-tap hole 2 days (both SAE and Metric)
4. Begin re-assemble and lubricate moving parts 3 days
5. Test and align saw 1 day
Note: Only work on 1 to 3 hours per day
The saw w
... Read moreas brought from a pawn shop
Was able to most parts from eReplacement but some parts or items are no longer
manufacture (had to make my own)
Read less
Did you find this story helpful?
Thank you for voting!
main slide guide on my tablesaw plastic parts where worn-out, could not get and accurate cut
Removed all old adjustment parts
install new parts, which was easy
hard part was adjusting the Eccentric Screw and non eccentric screws, OJT.
after adjusting, got my square out to make sure all was in alignment.
I installed the handwheel for my table saw by removing the cap then unscrewing the handle from the damaged handwheel. I then raised the blade so I could easily install the arbor nut and used the new wrench to remove the messed up arbor nut. I was able to replace the blade and completed my project.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
