Install
videos!

16235993-1-M-Ryobi-089006017093-Brush Cap

( Grid squares measure 1x1 inch )

16235993-1-S-Ryobi-089006017093-Brush Cap

16235993-2-S-Ryobi-089006017093-Brush Cap

Replacing your Ryobi Miter Saw Brush Cap

Brush Cap 089006017093

Manufactured by:: Ryobi
ERP Number:: ERP16235993
Part Number:: 089006017093

$5.95

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Videos Questions & Answers Repair Instructions Model Cross Reference

Product Description

This Brush Cap is an authentic OEM part for Ryobi and Ridgid Saws. The purpose of the brush cap is to keep the brush and brush holder securely inside the tool. The brush cap is made of a high-quality black plastic and is sold individually. A flathead screwdriver can be used when installing this part.

Frequently Purchased Together

Brush

★★★★★

(6)

$5.95

ASSEMBLY CARBON BRUSH

★★★★★

(2)

$5.95

Brush Holder

$5.95

ASSEMBLY ARMATURE WITH BEARING

★★★★★

(2)

$131.62

Troubleshooting

This part works with the following brands:

Ryobi
Ridgid

This part works with the following products:

Miter Saw
Saw

Part# 089006017093 replaces these:

089006017093,

Videos For installing this part.

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(4 rated repairs) ?

< Prev
1
Next >

Sort by:

The brushes in the electrical motor went bad. The housing for the brushes also needed replaced.

John from Munroe Falls, Ohio

4 of 4 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers
Parts Used:: 089006017093, 089006017092, 089006017091

Once I got the parts, I needed to reassemble the brush housings and the brushes themselves. Then the motor needed to be reconnected to the framing for the diamond blade for my Tile Saw. The parts fit perfectly and the motor started right up once it was put back together. So glad it all worked out. Runs like a champ again.

Did you find this story helpful?

Motor wouldn\'t run

Steve from Louisburg, Kansas

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 089006017093, 089006017092, 089006017091

Remove the set screws from the end of the motor housing, and pull the complete brush holder assembly out. Take the new brush holder and press it in the motor housing and tighten the set screw, install the brushes in the new holders, then screw on the brush caps.

Did you find this story helpful?

Ceramic tile saw motor would not start, sometimes would start by spinning blade by hand.

Steven from Key West, Florida

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 089006017093, 089006017092

Removed caps for brushes inspected worn brushes and replaced them.

Did you find this story helpful?

The dust cap broke off the wet tile saw.

Maurice from FISHERS, Indiana

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers, Wrench set
Parts Used:: 089038001062, 089006017093

The repair is still incomplete because the cap came apart because of the housing unit that consisted of the thread broke off somehow. Need to buy another part in order to make the tool fully functional.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP16235993
Manufacturer Part Number: 089006017093

Brand	Model Number	Description
Ridgid	R4040	Tile Saw - Tile Saw
Ridgid	R4040S	Tile Saw - Tile Saw
Ridgid	R4041	Saw - Ridgid R4041 Parts
Ridgid	R4041S	Saw - Ridgid R4041s Parts
Ryobi	RTS08	Table Saw - Rts08 8-1/4 In. Table Saw 1-20-21 (Rev:03)
Ryobi	RTS08T	Table Saw - Rts08t 8-1/4 In. Table Saw 1-20-21 (Rev:03)
Ryobi	TS1344L	Miter Saw - Miter Saw
Ryobi	TS1344LG	Miter Saw - 10-Inch Compound Miter Saw
Ryobi	TS1345L	Miter Saw - 10-In. Compound Miter Saw
Ryobi	TS1346	Miter Saw - 10-Inch Compound Miter Saw
Ryobi	TS1346T	Miter Saw - 10-Inch Compound Miter Saw