This is an authentic air cleaner element which is specially designed for Makita gas powered trimmers/brush cutters and blowers. This item filters out dust and debris from entering the engine. It is made out of foam material and it is sold individually. To replace this filter you will need a screwdriver. • Simply remove the screw that secures the cover • Remove the cover • Remove old element • Secure the new filter element • Reattach the cover
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
what I wanted
the part was just what I needed
Ron - July 9, 2019
Verified Purchase
★★★★★
★★★★★
Good job.
The parts were perfect and they saved me money.
Guest - August 14, 2019
Verified Purchase
★★★★★
★★★★★
great parts at a great price
the parts are a perfect fit and they were delivered quickly and the price was great
Guest - August 16, 2019
Verified Purchase
★★★★★
★★★★★
Easy to find the right parts
I have ordered several times and it has been great. The diagram are a big help to make sure you are ordering the right parts
Guest - September 18, 2019
Verified Purchase
★★★★★
★★★★★
Nice OEM Parts
My order was actually for three parts: Spark Plug (168401-9), Air Cleaner Element (443140-5), and Air Cleaner Element (443141-3). They were as described and exactly what I needed. Installation was a piece of cake and my blower is running like new. I would have given five stars except the shipping could have been quicker. My order was placed 4/25. On 4/26 I received an email saying my parts had shipped. USPS tracking indicated the shipping label was created on 4/26 but the package wasn't received by them until 4/30. It was standard shipping and I received the package on 5/2 - typical for 530 miles.
Guest - May 11, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the primer bulb cover, remove the old bulb and insert the new one and screw the cover on. Remove the air cleaner cover then remove the old air cleaner and install the new one. Remove the spark plug and gap the new one at 0.030
Disassemble the carburetor to get to the pump bulb was easy but when it is time to re-assembly it seems like there are little rubber o-ring and a few small parts that just would not fit in. The saver was the mechanical diagram of parts showing exactly which component goes into what position. Once I read the diagram it takes less than 30
... Read more minutes to put everything in place. The blower started on first pull and it purrs nicely.
Lesson learned. First, print out the assembly diagram and/or taking photos of each component BEFORE disassembly.
It is amazing that this Makita 4-stroke leaf blower has run for 21 years without any repair until now. During the past year it began to get a little more difficult to start until few weeks ago when the bulb finally leaked to the point that I could not get fuel into the carb.
Thanks eReplacementParts.com for the parts and diagram availability for the home handyman ME to fix it. The local shop wanted $60 to clean the carb and replace the bulb plus a two weeks turnaround time. I spent less than $20 and got the satisfaction of being able to do it myself in half day.
Replaced spark plug and gapped it at approximately 0.8mm, then removed the air cleaner cover and removed the old air filters and replace them with the new ones.
Did you find this story helpful?
Thank you for voting!
Air filter Cover broke off at the screw and parts were lost
removed old filters inserted new filters; purchased spark plug as back up blower working great!!!!
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
