Removed deck from mower.
Removed flange nut from top of pulley.
Removed pulley and spacer from jackshaft
Removed old mower blades..
Removed bolts holding mandrel housing and pulley guards.
Bolted on new mandrel housing.
Inserted new jackshaft and replaced pulley and spacer.
Greased new bearing in
... Read moremandrel housing.
Replaced mower blades and tightened all nuts and bolts.
Placed deck back onto mower.
Read less
Did you find this story helpful?
Thank you for voting!
Lawn tractor mower deck needed spindles replaced and new belts.
1. Removed mower deck from tractor.
2. Removed belt guards from deck and removed belts.
3. Removed old blades.
4. Removed all necessary brackets and pulleys to access spindles.
5. Removed all three spindles.
6. Cleaned mower deck, bead blasted rust from deck, primered and painted deck.
7. Installed ne
... Read morew parts in spindles and installed spindles in mower deck, lubed spindles with synthetic grease through grease zerts on spindles.
8. Reattached all brackets and installed new blades.
9. Reinstalled pulleys and new belts.
10. Reinstalled belt guards and reconnected mower deck to lawn tractor.
11. Adjusted and leveled mower deck to factory specs.
Remove the deck from the mower
Remove the the upper jack shaft nut and pulley
Unbolted old broken hub(jackshaft housing) & blade
I replaced bolts hub (jackshaft)& (shaft)spindle
Reinstalled blade & belt
Note: The jackshaft housing is not threaded but the bolts are self tapping
Mower has two blade
... Read mores, so I used other side as reference
Read less
Did you find this story helpful?
Thank you for voting!
Jackshaft bearings came apart, wrecking the other parts used in the repair.
Removed pulley, wrecked jackshaft housing, splined shaft, spacer, and blade adapter.
Cleaned all deck surfaces.
Reassembled jackshaft housing, splined shaft, spacer and blade adapter.
Installed the assembly on the mower deck, using original mounting bolts.
Installed pulley on top of assembly, and blade below the de
... Read moreck.
Threaded the belt through all the pulleys, making sure the tension was good.
Started up, and began mowing.
had to remove the mower deck to replace the shaft and reinstall deck
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_6.gif "Part Location Diagram of 94130MA Murray Spacer")
_WW_6.gif "Part Location Diagram of 94130MA Murray Spacer")
