Genuine Char-Broil replacement part, this item is sold individually. The purpose of the Heat Tent is to keep particles of food and debris from getting into the burners. They will also flavor the food you are grilling , because of the drippings falling on them and creating smoke.>br>The Heat Tents should be cleaned after grilling a few times, soap and water and a good scrub brush should do the job.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
heat tent and grill grates
I ordered grill grates and heat tents for my 14 year old charbroil bbq. they arrived quickly and were an exact replacement part. charbroil did not carry these replacement. I am super happy with ereplacement parts company.
Guest - July 21, 2019
Verified Purchase
★★★★★
★★★★★
Pleased
Easy to find replacement part on you site.
Came earlier than stated
Very pleased with service
Easy installation
Joann - July 2, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1 Removed the old burner and crossovers. Tried using a drill driver which only stripped the socket. Used vice drips to loosen the screws holding the main burners. Worked well.
2. Removed the entire units.
3. Replaced the main and crossovers with the new screws provided. (Lots of extra screws).
4 Put on new heat shields.
... Read more 5 Scraped the grills with a painting knife, cleaned them with high pressure cleaner and put them back.
6 Turned it on, first time worked well. Let it burn for 15 minutes.
All done.
1. Had to order parts twice since there was no way to replace the cross over tubes without replaceing the main burner tubes.
2. Had to drill out the screws holding the main burners then get an easy out. This alone took several hours and a few drill bits that were destroyed.
Remove the old corroded parts and replaced with the new parts. Hardest to change were the burner tubes because of the screw on each was badly corroded. Used vice grips to clamp on the screw heads and break loose. Then used common screwdriver to remove.
Did you find this story helpful?
Thank you for voting!
Burned out burner (1 of 4), rusted out carry over tubes, all 3, rusted out heat tents, 4.
Removed all old parts; vise grip pliers to remove old carry over tube screws. New tubes have new screws provided.
Remove igniter from old burner save old screws.
Remove screw from old burner, save screw.
Scrape and vacuum \"debris\" from grill bottom and sides.
Install new burner and original igniter. Tighten scr
... Read moreews, turn on gas and test fire (good).
Install 3 new carry over tubes with provided hardware. Test all burners (good).
Install 4 heat tents.
Install original grill grates. Ready to go!
Read less
Did you find this story helpful?
Thank you for voting!
Old heat tents were rusted and had many holes in them.
Removed heat grates, (no tools req\'d) took out old heat tents, (no tools req\'d) replaced heat tents, replaced heat grates, turned on propane, had hamburgers.
Did you find this story helpful?
Thank you for voting!
Heat tents, warming rack, and cooking grates were in well used condition.
1. Went online to find parts catalog for my model
2. Ordered parts
3. Removed old parts
4. Scraped and cleaned inside of grill
5. Vacuumed inside of grill.
6. Inspected burners
7. Installed new parts
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW.gif "Part Location Diagram of G433-0016-W1 Char-Broil Heat Tent")
_WW.gif "Part Location Diagram of G433-0016-W1 Char-Broil Heat Tent")
