This part comes directly from the manufacturer. The Lever Filter is used in many models of Bissell vacuum cleaners. This Filter fits into Lock N Seal Lever (part number B-203-1190) and is used to filter out any large particles before the motor. This Filter is made of a flexible foam. This Filter should be replaced if it becomes torn or lost. To replace this part the Dirt Cup (B-203-2453) and the Filter Case (B-203-2454) will need to be removed.
Troubleshooting
This part works with the following brands:
Bissell
This part works with the following products:
Upright Vacuum
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Yes parts were right
My vacuum is like new again
Guest - January 12, 2021
Verified Purchase
★★★★★
★★★★★
Exactly what I needed!
I didn't even know this was a filter my vacuum used. I ordered this and two other filters. My vacuum now works like new again. I would definitely order from ereplacementparts again.
Guest - April 14, 2021
Verified Purchase
★★★★★
★★★★★
Bissell vacuum
One of six parts I ordered. Fit perfectly and were Bissell vacuum parts I couldn't even find from the Bissell website!
Guest - May 14, 2021
Verified Purchase
★★★★★
★★★★★
Perfect Fit
just what was needed. glad I found you guys
Guest - June 28, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
Less than 15 mins
(5 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The upright locking lever broke and i had to remove old one and put new in. I needed two thin blade screwdrivers to expand the housing enough to pop old release out and it was trial and error until I
Put the wheeled assy up on back of a chair as I needed to get at the bottom where the release lever was in plastic housing. Lever was held in place and pivoted on two prongs on the new lever I saw how there was an angle to prongs saw I knew it would slide down and lock in to slots in housing so I knew I had to get it to go upward after a
... Read more few minutes trying to pop it out one side at a time I took two screwdrivers with 1/8th inch shafts and inserted on both sides of lever moving prongs out of slots. I hit lever with a pen and it fell out Putting vacuum on floor I inserted new lever until it snapped in place. The filters I replaced as I needed to put a little more volume on my order so decided to replace the filters. The best advice I can give on making a repair is to study the replacement part to see how it is made to be sure of what you are going to do. I do not advise using knife blades but it is up to the DIYer to decide.
Remove the dirt cup
Remove the pleated filter
Remove the lock lever and filter
Remove the foam filter
Replace the filter remove
Install the part in reverse
Did you find this story helpful?
Thank you for voting!
All the filters were old and in need of replacement.
I had already removed all parts and cleaned them and removed broken belt. Then looking at picture of parts on your web sight. Replaced all filters and reinstalled the belt turned on the vac and it works like a champ. This is bagless Bissell with Hepa Filter.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
