Part Location Diagram of A10157SV DeWALT Carbon Brush
See part A-69 in the diagram
( Grid squares measure 1x1 inch )

Carbon Brush A10157SV

Manufactured by:
DeWALT
ERP Number:
ERP10186416
Part Number:
A10157SV
Original Equipment Manufacturer ?
On Order

A Bit Difficult 

1- 2 hours 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine DeWalt replacement part. rnIncludes 2 Carbon Brush with wire lead attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Craftsman
  • Black and Decker
  • Bostitch
This part works with the following products:
  • Compressor
Part# A10157SV replaces these:
A10157SV,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Motor sparks too bad

Dennis from Olympia, Washington

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
A10157SV
The compressor sparks real bad on the armature
Did you find this story helpful?
Thank you for voting!

Sheared flywheel bolt, bent connecting rod, damaged piston Assembly, worn brushes

Francis from Pleasent Hill, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Just swapped out old parts with new ones. Could have used torque specs. for bolts.
Did you find this story helpful?
Thank you for voting!

Compressor motor was sparking and would not run consistently

Paul from Alvarado , Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
A11031, A10157SV
1. Removed the plastic covers
2. Removed and replaced the fan and brushes per instructions
3. The lead crimp connectors were missing from the brush kit so I had to make two crimp connectors
4. Connected the brushes to the wiring
Unfortunately this didnGÇÖt fix the problem because the motor still overheated and w ould quit running. I had to replace the compressor.
Did you find this story helpful?
Thank you for voting!

brushes worn out

Jackie from Omega, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
A10157SV
Pulled spring up with \"L\" shaped small tool. Removed old brushes. Replaced with new brushes.
Works Great!
Did you find this story helpful?
Thank you for voting!

BrushGÇÖs in the motor were worn out.

Thomas from West Point, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
A10157SV
Just followed a U-Tube video and everything went smooth. Very impressed on how fast the replacement parts were delivered. Just have to be careful not to lose the brush retainer springs. Very easy to lose. Thought the price was a little high for the brushes but spending $50 vs. $300 or $400 for a new compressor was worth it. Very pleased o verall. Would order from them again..
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10186416
Manufacturer Part Number: A10157SV
Brand Model Number Description
Craftsman 919-16755 Compressor - Compressor
Black and Decker 919-16760 Compressor - Compressor
Black and Decker 919-16761 Compressor - Compressor
Black and Decker 919-16762 Compressor - Compressor
Black and Decker 919-16763 Compressor - Compressor
Craftsman 919-16770 Compressor - Compressor
Craftsman 919-16771 Compressor - Compressor
Craftsman 919167600 Compressor - Air Compressor
Craftsman 919167610 Compressor - Air Compressor
Craftsman 919167620 Compressor - Air Compressor
Craftsman 919167621 Compressor - Air Compressor
Craftsman 919167630 Compressor - Air Compressor
Craftsman 91916770 Compressor - Compressor
Craftsman 919167700 Compressor - Air Compressor
Craftsman 919167710 Compressor - Air Compressor
Bostitch CAP1615-OF Compressor - C 15G Vp Ehp Of 200Psi B
Bostitch CAP1645-OF Compressor - C 4.5G Jb Ehp Of 200Psi B
DeWALT D55146 Compressor - 4.5 gallon, 200 PSI Hand Carry Compressor
DeWALT D55149 Compressor - Compressor
DeWALT D55167 Compressor - 200PSI, 15Gal., 120V Electric Compressor
DeWALT D55168 Compressor - 200PSI, 15Gal., 120V Electric Compressor