This is a genuine OEM approved replacement part designed for use with chop saws. This item holds carbon brush against the armature. It is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately. To replace this assembly you would need a screwdriver and pliers. • First remove screws holding the cover together • Carefully remove two halves of the housing to gain access to armature and brush holder • Remove the screws holding brush holder to the trigger • Remove the armature assembly and the brush holder • Install the new brush holder, brushes and the armature • Reassemble and test your tool
1. Removed end cover (2 screws)
2. removed brush holder caps and remove old brushes.
3. Loosen set screw holding brush holder. Removed the warped brush holder with pliers & screwdriver. Case was slightly warped due to the excess heating so the holder came out in several pieces.
4. Clean rotor contacts with electrical con
... Read moretact cleaner to remove carbon buildup.
5. Used small file to smooth out case sides for new brush holder to fit back in. Inserted new holder and tighten set screw back down.
6. Install new pair of brushes and holder caps. Reinstall end cap.
7. Test ran chop saw to ensure a good repair.
Have a problem with brush wire connector. The wire end was bunt and a new end was installed
which does not hold well , in use it comes off . Have go back into saw to fix . No part number for the right kind of connector .
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10182308
Manufacturer Part Number: 622440-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
