This is the handle grip for Black & Decker and Dewalt walk-behind push lawn mowers. It is supplied directly from original equipment manufacturer and it is sold individually. It is specially designed to provide solid stable grip on the upper handle of a mower for better control. This handle grip is made out of rubber material. To replace this grip you will need a screwdriver.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
part for a neighbors mower
I gave my mower to a neighbor and found out that this same mower is no longer made. I bought as many parts for it as available and this was one of them. I suppose it works for them. Hadn't heard otherwise. No news is good news! Keep up the good work yourselves and your excellent customer service. Fast, resonable shipping too!
Guest - June 8, 2023
Verified Purchase
★★★★★
★★★★★
Part fit great,
Good fit, not exactly the same size but it does the job just fine, thanks
Guest - July 5, 2019
Verified Purchase
★★★★★
★★★★★
Fairly easy repair.
Although not identical to the original, this part will work well. A little difficult to put in place, but practice makes perfect. Use some lubricant on the inside of the sleeve.
Guest - June 4, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the handle and removed the old grips. Sprayed the handle with soapy water and slid the grips in place. Then reattached the handle. Removed the cutting blade and replaced the fan and blade retainer. Removed the screws and brackets holding the rear wheels in place, pulled the rear wheels out of the way. Slid off the torn flap a
... Read morend slid the new flap in place. Returned the wheels to their original location and installed the screws and brackets to hold the wheels in place.
Disassembled the handle and replaced worn parts. Also replaced the mulching blade. The old lock nut was on really tight. Had to use WD-40 and a pipe extender on the adjustable wrench in order to loosen the nut. Replaced knobs that had been lost over the years and cushioned handle grips that had ripped. Everything was pretty straightforwar
... Read mored. Runs like new.
Took the handle apart and slid new grip on, something like wd-40 helps big time.
Flip handle is just a simple replacement, reassembly of the clamshell that houses it and reattaching the cable that allows you to flip the handle
1. Removed 5 screws from housing of off/on switch
2. Removed old switch and disconnected leads
3. Attached leads to new switch and set switch into place
4. Lined up housing of the power switch and reinstalled screws
5. Removed handle from mower deck
6. Cut off old foam grip
7. Slid new foam grip onto ha
... Read morendle using generous amounts of soapy water
Removed the old handle part that was still on trimmer pole, snapped on new handle and tightened knob.
Did you find this story helpful?
Thank you for voting!
My old electric B&D lawnmower needed parts and pieces, but was functioning perfectly. I was able to order all of the parts easily at ereplacementparts.com,, they were shipped very quickly and all fit
1. Cut off what remained of the old handle grip.
2. Removed the power switch and flip switch from the upper handle
3. Removed the large plastic retaining nut from the handle eye bolts
4. Rubbed a bit of cooking oil over the metal handle
5. Slid the handle grips on
6. Reassembled the handle
7. Re-attach
... Read moreed the power switch and flip switch
8. Removed the blade nut
9. Replaced the blade insulator, spacer and mulch blade.
10. Re-applied the blade nut
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10022833
Manufacturer Part Number: 90566348
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
