This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy replacement
Cord end worked like it should
Guest - May 4, 2019
Verified Purchase
★★★★★
★★★★★
Strain relief
This part fit exactly and should keep the power cord going for another 20 years or so.
Shipping was a little more than the part but it came in only few days.
Guest - June 13, 2019
Verified Purchase
★★★★★
★★★★★
great and easy to install
fit perfect great to have a new one, quick arrival,happy
Guest - October 10, 2019
Verified Purchase
★★★★★
★★★★★
Worked perfect
I used it to replace the original on my DeWalt saw
Guest - November 2, 2019
Verified Purchase
★★★★★
★★★★★
Perfect fit.
Arrived on time, My saw is like new again.
Arlie - December 4, 2019
Verified Purchase
★★★★★
★★★★★
Great source for parts..great service
Perfect part..just like the original.
Guest - May 30, 2020
Verified Purchase
★★★★★
★★★★★
Excellent.
Part delivered quickly and fit perfectly. Excellent service.
Guest - October 12, 2020
Verified Purchase
★★★★★
★★★★★
Exact part I needed
Appears to be an OEM part. Would not be surprised if it is.
Guest - November 18, 2020
Verified Purchase
★★★★★
★★★★★
Better than Original
I am currently remodeling our home after a broken pipe fiasco. My chop saw was having issues with the power connection so I went online to get some help.
I definitely found the help I needed.
The representative I spoke with was very helpful and personable leaving me with a positive feeling about the company.
The replacement cord was heavier gauge and significantly longer than the original.
The replacement parts arrived ahead of expectations and my saw is now good as new.
Thank you
Anonymous - March 3, 2022
Verified Purchase
★★★★★
★★★★★
The real thing.
Heavy duty industrial parts for the B & D Saw cat.
Guest - October 13, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1)Remove the 2 screws holding handle to top of motor housing.
2)Remove the (8?) screws holding the top of the motor housing together.
3)Remove wire nut on neutral (white) wire.
4)Remove power cord and cord protector from motor housing.
5)Thread new power cord through cord protector.
6)Insert new cord assembly
... Read more into motor housing.
7)Connect neutral (white) wires with wire nut.
8)Cut old hot (black) wire at a location were new black wire and a additional wire nut will fit in the motor housing.
9)Connect hot (black) wires with a new small wire nut.
10)Reassemble top of motor housing and handle removed in steps 1 & 2.
11)Plug new cord in a power outlet and test run the saw.
1. Removed handle, took a pic prior to starting, disconnecting all wires.
2. Slid protector into place, measured & cut necessary wires to follow the original path & length needed.
3. Added proper size wire connectors and reinstalled everything to look the same way before I started.
4. Put handle back and most importantl
... Read morey....... tested.
Removed the screws from the top handle, and removed the carrying handle. Took a picture of how all the parts in the lower handle were assembled and wired. Removed the cord clamp from the top handle , then removed the cord. I then removed the parts from the lower handle\' then removed the lower handle from the saw. I installed the new lowe
... Read morer handle on the saw, then replaced all of the internal parts. I then slid the new cord protector on the new cord and connected the cord. Screwed on the cord clamp. Then installed the top handle on and screwed the handles together. I then screwed the carrying handle to the top handle.
Read less
Did you find this story helpful?
Thank you for voting!
frayed and cracked power cord, original from 1984.
1. Torn down to bear bones
2. Clean off years of rust by soaking in vinegar for 2 days
3. Remove busted bolts and re-tap hole 2 days (both SAE and Metric)
4. Begin re-assemble and lubricate moving parts 3 days
5. Test and align saw 1 day
Note: Only work on 1 to 3 hours per day
The saw w
... Read moreas brought from a pawn shop
Was able to most parts from eReplacement but some parts or items are no longer
manufacture (had to make my own)
Read less
Did you find this story helpful?
Thank you for voting!
the protector broke just outside the handle where it is fitted in to case
Removed the cord end on power cord. Slide old cord holder/protector oft the end of cord. Slid new cord protector onto cord. Fit cord holder in to retaining area. Installed the screws holding handle together. Put cord end back on cord, Job completed.
Side note: We had put a replacement end on cord few years ago when it f
... Read moreailed
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10173396
Manufacturer Part Number: 445338-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
