Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
Install
videos!
9285118-1-M-Husqvarna-530069611-Kit - Bar Adjust
Part Location Diagram of 530069611 Husqvarna Kit - Bar Adjust
See part A25 in the diagram
Replacing your Poulan Chainsaw Kit - Bar Adjust
( Grid squares measure 1x1 inch )
9285118-1-S-Husqvarna-530069611-Kit - Bar Adjust Part Location Diagram of 530069611 Husqvarna Kit - Bar Adjust Replacing your Poulan Chainsaw Kit - Bar Adjust

Kit - Bar Adjust 530069611

Manufactured by:
Husqvarna
ERP Number:
ERP9285118
Part Number:
530069611
Original Equipment Manufacturer ?
$11.92
★★★★★
★★★★★
24 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(29 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Videos Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an authentic replacement part manufactured for use with Craftsman chainsaws and a pole pruner. The adjustment screw kit is used to change the tension of the chain around the bar. This adjustment screw includes the pin and gasket and is sold as an individual replacement part.

Frequently Purchased Together

?
Bar Adjustment Retainer
★★★★★
★★★★★
(2)
$5.95
In Stock
Minimum Quantity of 2 required

Troubleshooting

This part fixes the following symptoms:
  • Chain comes off guide bar
This part works with the following brands:
  • Poulan
  • Husqvarna
  • Craftsman
  • Jonsered
  • RedMax
  • Snapper
This part works with the following products:
  • Chainsaw
  • Pole Saw
  • Trimmer
Part# 530069611 replaces these:
530069611,

Videos For installing this part.

?
Replacing your Kit - Bar Adjust
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(24 Reviews)
Click to filter by ratings:
  • 5 stars
    23
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
"Back in Business"
This part was exactly what I needed to repair my chainsaw. Repaired in minutes, and working as good as new again! "Back in Business" keeping my trees trimmed neatly!
Guest - October 23, 2019
Verified Purchase
★★★★★
★★★★★
Esoteric Part for an older Chain Saw
Got the correct part in a reasonable amount of time. The little part I needed wouldn't be one that typically needs to be replaced but my older model chain saw had to have it to operate. Now I'm back in business
Guest - April 12, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected
Parts came quickly, fit perfectly and I was back up running in 5 minutes
Scott - April 20, 2020
Verified Purchase
★★★★★
★★★★★
Right Parts at the right price
I realize that due to COVID-19 it took much longer to receive my parts than it normally would. The parts were for my chain saw and all the parts fit and my chainsaw is working again.
DALE - June 24, 2020
Verified Purchase
★★★★★
★★★★★
Fast and courteous item as described
Right part for my chainsaw
Guest - May 30, 2020
Verified Purchase
★★★★★
★★★★★
Exact part I needed
The part arrived in perfect condition. Instructions on how to properly install. Took less than a minute to fix. Excellent site. I ordered the part and received it quickly and faster than any repair shop near me could get it. Thanks!
John - September 14, 2020
Verified Purchase
★★★★★
★★★★★
Helpful and fast
The representative I talked to was helpful, understood what I wanted, and easy for me to understand. Part arrived very quickly; quicker than anticipated. Just as important, it was the correct part. Thank you
Jimmy - September 29, 2020
Verified Purchase
★★★★★
★★★★★
Exactly as expected
This piece got my poulan 2050 back up and running. Ereplacementparts.com had the cheapest price I could find without using a very cheaply made part. They processed and shipped my item expediently. Highly recommend
Guest - October 15, 2020
Verified Purchase
★★★★★
★★★★★
Bar adjustment kit
I ordered the clutch cover and the bar adjustment kit for my Poulan chain saw. Both parts were excellent and I received them very fast. The only thing I would add is that when I read the info about the clutch cover it didn’t say that the bar adjustment kit was included. So I ordered the kit also. Then when I received the parts the clutch cover already had the adjustment kit on it. No big deal, I now have a spare set if I need them.
Guest - February 15, 2021
Verified Purchase
★★★★★
★★★★★
Saved my little chainsaw!!
Accidentally backed out the chain tensioning screw to the point I lost the nut with the tab making the saw useless. Google found you guys and a quick search found what I needed. Fast delivery and a helpful video got me back to my chainsaw duties. Thank you.
Guest - May 29, 2021
Verified Purchase
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(29 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Chain and bar tensioner was worn out

hugo from kill devils hills, North Carolina

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
530069611
Remove the chain brake assembly and replace the parts to adjust the bar. Note: Make sure you brake is in the unlocked position
Did you find this story helpful?
Thank you for voting!

Adjustment assembly broken

Dave from Bellaire, Michigan

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
581562101, 530069611
Followed the directions for the adjustment assembly and put on the new chain. Saw is better than new!

GREAT SERVICE. THEY HAVE EVERY PART YOU COULD EVER NEED!!!!
Did you find this story helpful?
Thank you for voting!

The screw and adjustment nut was missing

Jerry from Peoria, Illinois

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
580940901, 530069611
The instructions that came with the bar adjust were perfect. Showed you exactly like it was supposed to go. I also ordered a new fuel cap. I would definitely order from your company again.
Did you find this story helpful?
Thank you for voting!

chain kept jumping off sprocket

Donald from Fort Collins, Colorado

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
501628301, 530071945, 530069611
1. I removed the bar by removing the 1/2 inch nuts holding the bar cover.
2. Using a screw-driver I removed the e-clip holding clutch washer, and removed the washer.
3. At this point, the clutch drum should pull off. Mine was quite sticky so I ended up using my channel-lock pliers to pull on the sprocket. I was replacing this anyway (sprocket is on clutch drum) so I wasn\'t worried about marring the sprocket.
4. Replaced the clutch drum. Placed a new clutch washer back on (old one was perfectly serviceable but decided if I was in there I would replace it). Put the new e-clip on - be careful here, it can go flying!
5. Since I had lost my bar adjust screw earlier I replaced it in the bar cover. Then I bolted down the bar cover.
Read less
Did you find this story helpful?
Thank you for voting!

Saw tension-er wasn\'t working/cracked case

Jon from Atchison, Kansas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
501628301, 952044689, 581562301, 530057910, 530069611, 530015917
Removed and replaced worn and broken parts
Did you find this story helpful?
Thank you for voting!

The sprocket on the drum was stripped, and bar adjuster screw was missing

Tomalisia from New Albany, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
530069611, 530047061
My sprocket was damaged so that when I revved the engine the chain would not turn, the engine revved normally but the chain would not turn!!! I first removed the side cover nuts and the bar with the chain, then I removed the other side cover with the pull start. Then I removed the spark plug and turned the flywheel until the piston was o n the down stroke. I gently fed the nylon rope into the cylinder until it was full of rope, then turned saw on its side with the clutch facing upward, and turned the clutch in the direction of the arrow that says \"off\", when it became hard to turn the clutch, because the piston is pushing against the rope, I used a special tool for removing clutches and loosened the clutch from the crankshaft in the clockwise direction. Then carefully laying each part aside I removed the clutch, washer, drum with sprocket and thrust washer. Then I cleaned the side of the saw as good as I could. After a good cleaning and inspection of all the parts and the saw I began assembly in reverse order, the thrust washer, the NEW sprocket drum, washer, and then the clutch. I gently turned the clutch with the clutch tool until I felt resistance, and then tightened the clutch fully. Then carefully remove the rope from the cylinder and replace the spark plug if it needs a new one now is the time to do it, then replace the pull rope cover. I had to fix the bar adjuster screw on my saw because the retaining washer had actually broken and that\'s why it was missing, after putting the new screw kit in, I reattached the bar, chain, and side cover. Filled it up with fuel and bar oil and went outside and tested it out. Runs as good as new.
Read less
Did you find this story helpful?
Thank you for voting!

Purchased this chainsaw at a garage sale and it was missing the parts.

Gilbert from TIJERAS, New Mexico

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
530058933, 530069611, 530015917
Basically put the bar and the chain back on the saw, adjusted the tension and secured two nuts that hold it all in place.
Did you find this story helpful?
Thank you for voting!

Adjustment screw became stripped and would not stay tight

Lee from Georgetown, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
530069611
Removed cover. Removed chain and bar. Inserted new parts. Reassembled and tightened chain.
Did you find this story helpful?
Thank you for voting!

No issues

Bishop from Hamer, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
530069611
1. Remove the cover.
2. Installed the clip.
3. Inserted the screw.
4. Adjusted the screw.
5. Replaced the cover.
Did you find this story helpful?
Thank you for voting!

Chain bar tensioner broke (screw was bent due to someone forcing it)

Randolph from Loris, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
530069611
Followed instructions that came with new part. Took less than 10 minutes to fix.
1. Remove chain cover
2. Remove old part
3. Install new part
4. Replace cover
5. Tension chain to specs
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP9285118
Manufacturer Part Number: 530069611
Brand Model Number Description
Husqvarna 125LD Trimmer - 125 Ld (2006-12)
Husqvarna 125PRUNERATTACHMENT Trimmer - Trimmer
Husqvarna 128LDX Trimmer - Us Can
Poulan 1900 Chainsaw - Gas Chainsaw
Poulan 1900 LE Chainsaw - Poulan Chainsaw Model 1900 LE (1900LE) Parts
Poulan 1950 Chainsaw - Gas Chainsaw
Poulan 1950LE Chainsaw - Gas Chainsaw
Poulan 1975 Chainsaw - Gas Chainsaw
Poulan 1975LE Chainsaw - Gas Chainsaw
Poulan 2025 Chainsaw - Gas Chainsaw
Jonsered 2035 Chainsaw - Chain Saw
Poulan 2050 Chainsaw - Gas Chainsaw
Poulan 2050LE Chainsaw - Gas Chainsaw
Poulan 2050WT Chainsaw - Gas Chainsaw
Poulan 2055 Chainsaw - Gas Chainsaw
Poulan 2055LE Chainsaw - Gas Chainsaw
Poulan 2075 Chainsaw - Gas Chainsaw
Poulan 2075 LE Chainsaw - Poulan Chainsaw Model 2075 LE (2075LE) Parts
Poulan 2075C Chainsaw - Gas Chainsaw
Poulan 2075OC Chainsaw - Gas Chainsaw Gas Chainsaw
Poulan 2150 Chainsaw - Gas Chainsaw
Poulan 2150 PR Chainsaw - Poulan Chainsaw Model 2150 PR/TYPE 1 (2150PR/TYPE1) Parts
Poulan 2150 PREDATOR Chainsaw - Poulan Chainsaw Model 2150 PREDATOR/TYPE 1 (2150PREDATOR/TYPE1) Parts
Poulan 2150 PREDATOR LE Chainsaw - Poulan Chainsaw Model 2150 PREDATOR LE/TYPE 1 (2150PREDATORLE/TYPE1) Parts
Poulan 2150-PREDATOR -E Chainsaw - Chainsaw
Poulan 2150LE Chainsaw - Gas Chainsaw
Poulan 2150LE PREDATOR Chainsaw - Poulan Chainsaw Model 2150LE PREDATOR/TYPE 1 (2150LEPREDATOR/TYPE1) Parts
Poulan 2150LX Chainsaw - Poulan Pro Chainsaw Model 2150LX Parts
Poulan 2150PR Chainsaw - Chainsaw
Poulan 2155 Chainsaw - Gas Chainsaw
Kit - Bar Adjust
$ 11.92
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖