Genuine Poulan replacement part, this part is sold as a kit. The purpose of the 530071259 Oil Pump Kit is to keep the chain saw chain oiled, so it will not burn the teeth or get dull quicker than a well oiled chain would. It also contains complete installation instructions with it.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exact replacement
Easy repair, good price and chainsaw was quickly repaired.
John - October 15, 2019
Verified Purchase
★★★★★
★★★★★
Finding the right stuff
I needed to find repair parts for my Poulan Pro 220, used gift from my buddy in 2017. I don't do much tree work , just when its required on a landscape install. The rental company, Topp Gunn does repairs for outside equipment , and are a rental group for me over the years in Austin. Great guys. So when they told me what was broken, I needed to find the parts myself, online. So on I went. From 1st search I went to your site, found diagram of saw ( exploded) and traced the location of clutch to numbered parts , assembly. Then went to customer service to order & confirm I had it right. Your techs are very well trained , and helped immensely. Parts arrived on time , saw was delivered to shop with, and next day picked up my repair. The coolest part of this outing is my connection for you to Top Gunn for all their outside repair parts needs. They had used you for the new sales products they sell inside , but not in this aspect. Nice.
Guest - November 16, 2019
Verified Purchase
★★★★★
★★★★★
Fast service.
Perfect fit. Worked great.
Guest - May 1, 2020
Verified Purchase
★★★★★
★★★★★
Oil pump yes
Shipped from manufacturer so quite a delay but still happy when it arrived
Frederick - July 15, 2020
Verified Purchase
★★★★★
★★★★★
Great product easy transaction fast shipping.
The new part fit like a glove. Brought back new life to this chainsaw. Will order again soon.oh did I mentioned how fast they ship out your parts.
Guest - November 27, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
The part I needed, Arrived on time. I will save contact info for my next repair.
Guest - February 25, 2022
Verified Purchase
★★★★★
★★★★★
Oil pump for chainsaw
Ereplacement sent me the part number I asked for. The problem is my owners manual wasn’t the proper manual for my chainsaw. It was my error in ordering.
James - June 27, 2022
Verified Purchase
★★★★★
★★★★★
Great part
Arrived in great condition and fit perfectly for my craftsman chainsaw
Guest - September 23, 2020
Verified Purchase
★★★★★
★★★★★
I got parts for type 2 and had a type 1 saw parts were all wrong but already opened them so I willbe stuck with them my fault should have been more selective
wrong parts did not work already open so I am stuck with them
Guest - March 18, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the spark plug and inserted a rope to lock the piston, then removed the clutch with the special clutch removal tool. Be sure to use a rope with no loose strands that can become stuck between the piston and cylinder wall. Remember the clutch is left-hand thread which means it loosens to the right. The trickiest part of the pro
... Read morecess is installation of the new coil spring gear onto the shaft using only screwdrivers, pliers, etc. I didn\'t have the special tool for this but would invest in one next time. Be sure the coils are equally spaced like they were before installation on the shaft. Replace the oil pump assembly and reconnect the pickup hose. Pretty easy and self explanatory installation once you remove the clutch.
Remove chain and bar, remove top cover for access to engine . Hold back engine from turning and use spanner wrench to remove clutch drum .
Use screw driver to remove 2 screws from oil pump. Reverse process to reassemble with new parts.
Remover both side covers.
Use flywheel lock
Use clutch removal tool, i didn\'t have one so i used a brass drift and hammer \" these are left hand threads\"
Remove the screws for the oil pump, disconnect the hose.
My worm gear wasn\'t hurt so i didn\'t replace it.
Clean all the old saw dust and debris
... Read more>I removed the oil pickup tube and pushed the new on in place.
Connect the oil pump to the pickup tube, reinstall the screws
Replace the clutch tighten it. I set the clutch with the chain break after i got the saw assembled.
Replace the cleaned covers chain and bar.
The old oil pump died because the former owner let oily saw dust and weeds build up behind the clutch and it melted the pump housing.
1 Watched several videos on U-tube
2 Took out spark plug Plugged piston with robe
3 Used Clutch Removal Tool -Easy
4 Replaced kit oil pump did not use spring afraid I would not get it set right Do not know if this was causing oil leak - old one looked good
5, Installed clutch drum and gear assembly and clutch
... Read more/>6 Not bad for a beginner and a woman - it worked !!
I watched ereplacements video on how to replace the oil pump. It wasn\'t the exact same one but it did help. here is the link https://www.youtube.com/watch?v=iDvNVX2B8C8
Removed plug; removed chain and bar; removed clutch; took off the housing with the clutch housing; removed two screw holding the pump; removed the old pump; installed the new items; and it worked.
Did you find this story helpful?
Thank you for voting!
Oil pump got dirty. Gears from oil pump striped. Replaced with new oil pump.
Remove spark plug. Twist rope into cylinder until piston locks. Grabbed chainsaw clutch with long nose locking plier. Use wrench to open clutch. Took out clutch drum. And cleaned all parts. Replaced oil pump. Put clutch drum and clutch back. Filled chainsaw oil in oil tank. Screwed spark plug back in. And started chainsaw. Chainsaw works
... Read moregreat. Thanks.
1. Removed chain bar cover/chain bar.
2. Removed upper engine casing, removed sparkplug and inserted length of spring into cylinder (with end hanging out) to prevent piston from turning.
3. Removed clutch housing (removes clockwise) and associated washers.
4. Removed old oil pump and pick-up tube (my oil pump gear was st
... Read moreripped due to debris wrapping around shaft).
5. Remove coil around drive shaft (coil acts as pinion gear for oil pump).and replace with new coil from oil pump kit (ensure proper intervals between coils).
7. Install new pickup tube and oil pump.
8. Replace clutch assembly.
9. Remove string from cylinder and replace spark plug and upper engine housing.
10. Replace chain bar and cover.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16352789
Manufacturer Part Number: 530071259
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
