Part Location Diagram of JT9-100042 Jet TRUNNION
See part A-36 in the diagram
Replacing your Jet Band Saw TRUNNION

TRUNNION JT9-100042

Manufactured by:
Jet
ERP Number:
ERP19124480
Part Number:
JT9-100042
Original Equipment Manufacturer ?
  Works with your model  JWBS-14OS!
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(14 rated repairs) ?
  Works with your model   JWBS-14OS!

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Jet
This part works with the following products:
  • Band Saw
  • Table Saw
Part# JT9-100042 replaces these:
100042,

Videos For installing this part.

?
Replacing your TRUNNION

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(14 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Trunion broke

N. from Woodbridge, Virginia

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
JT9-100042
I installed the trunnion and it hung up while tilting the saw table. I determined that the locking block inside the trunnion was hanging up because it wasn\'t wide enough at one part. It was easier to sand and file the block to glide smoother. I took an estimated 5 thousand of an inch ( 0.005\") off each side. It now works fine.
Did you find this story helpful?
Thank you for voting!

I bought a Jet band saw at a sale that had been dropped. Several parts were broken and had to be replaced.

Don from Chandler, Arizona

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench set
I removed all of the broken parts and ordered replacement parts from ereplacementparts. After replacing all of the parts I put on a new blade and adjusted everything. Works Great.
Did you find this story helpful?
Thank you for voting!

Both trunions werebroken into many pieces. Cast white metal seems weak to be used there.

Roger from Midland, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
JT9-100051, JT9-100042
I already had remloved the table when the pieces were noticed. When the trunnions arrived, I loosely bolted both to the under side and placed it back place, tightened front and back knobs Then check for squareness to the blade and mtightened the six bolts holding the trunnions in place.
Did you find this story helpful?
Thank you for voting!

table broke off saw when saw fell out of the back of my pickup truck.

Robert from Richmond, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Removed the broken trunnions from the table and replaced them. Replaced the clamp shoes also. Reinstalled the table and adjusted to to perpendicular to the saw blade.
Did you find this story helpful?
Thank you for voting!

Trunnion damaged

Michael from Miami, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
JT9-100042
Removed and replaced.
Did you find this story helpful?
Thank you for voting!

Trunnion wore out

Gary from GREEN BAY, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
JT9-100042
Very easy to remove the old Trunnion with socket. Took them off and put the new ones on . Works like new.
Did you find this story helpful?
Thank you for voting!

The table support and adjusters were broken.

tim from Newark, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1. Removed the table off the saw.
2. Removed the broken parts.
3. Replace them with the new ones.

Thanks, if I need more parts in the future I will be order from you agains!
Did you find this story helpful?
Thank you for voting!

Broken trunnion

Forrest from Olympia, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
JT9-100042
Removed 3 bolts attaching broken trunnion and replaced with new trunnion. Exact replacement for 14\" Jet bandsaw.
Did you find this story helpful?
Thank you for voting!

Bandsaw tilt broke aluminum trunnions

Dennis from Worthington , Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
JT9-100051, JT9-100042
Took table off - turned it upside down removed old trunnions with power screwdriver [three bolts each] installed new parts, replaced table and adjusted the new parts. Repair complete. Great parts fit was good
Did you find this story helpful?
Thank you for voting!

Trunions broke apart.

William from Meadow Vista, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
JT9-100042
1. Removed table.
2. Removed and replaced old trunions.
3. Reinstall table.
4. Reinstall blade.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP19124480
Manufacturer Part Number: JT9-100042
Brand Model Number Description
Jet 708113A Table Saw - Jet 708113a Parts
Jet 708115K Table Saw - Jet 708115k Parts
Jet 710116K Table Saw - Jet 710116k Parts
Jet JWBS-14CS Band Saw - 14-inch Woodworking Band Saw
Jet JWBS-14DXPRO Band Saw - Delux Pro Band Saw
Jet JWBS-14OS Band Saw - 14-inch Woodworking Band Saw