This is an authentic replacement part which is supplied by the original manufacturer. The line guide pawl is designed for use with Shimano fishing reels. The purpose of this component is to interact with the line guide and the worm gear. It is an important part of the mechanism that guides the lines from the spool. You will require a screwdriver when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. Keep in mind this high-quality line guide pawl is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Very satisfied
Right part. Reel works great now. Quick delivery.
Guest - June 2, 2019
Verified Purchase
★★★★★
★★★★★
everything was right on, works perfectly
everything was bagged separately labeled, and pristene. Thank you for the priveledge of doing business with you
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
Great Part
Part fit as expected and works perfectly and revived my reel where i thought there was no places that sold this part. Awesome place for parts
Guest - July 9, 2019
Verified Purchase
★★★★★
★★★★★
Great part and perfect fit
Replaced this and two gears in my Calucutta 400 reel after the level wind stopped working. Fast shipping, inexpensive and oem parts. I'll do business with them again.
Martin - November 20, 2019
Verified Purchase
★★★★★
★★★★★
Great part
Great quality, perfect fit
Guest - May 6, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
The part fit perfectly and seemed to be good quality. It was easy to remove the old line wind pawl and replace it with the new one. It was shipped on time and arrived when they said it would. Ereplacementparts.com is my go to place to get parts.
Steve - September 9, 2020
Verified Purchase
★★★★★
★★★★★
Exactly what I needed
The part was perfect! Took just 5 minutes to replace the old part! Works like new! Happy fisherman!
Guest - February 18, 2021
Verified Purchase
★★★★★
★★★★★
worked as expected
Part was what I needed
Joe - August 2, 2021
Verified Purchase
★★★★★
★★★★★
Exact fit, had a great precise description of part
Great , fast service, wish all orders I made were this easy
Larry - August 21, 2021
Verified Purchase
★★★★★
★★★★★
The part was perfect and received very quickly
I was pleased. The part was perfect and I received it in days of the order. I will use again
Guest - March 7, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove side cover and removed spool. Removed handle and drag assy. Had to soak it had been sitting up for 2 years. Cleaned with warm soapy water with swabs replace new lube and reassembled. This is not required to replace Pawl just remove cap and drop pawl in secure cap and lube.
Disassembled Shimano 401. Cleaned and Serviced all hardware with lithium grease. Replaced worm gear and line pawl. Additional lubricants. Reassembled.
Verified reel functionality.
Works perfect.
Great parts. Perfect fit.
Did you find this story helpful?
Thank you for voting!
The pawl was locking up. It was a older reel so I replaced the worm shaft as well. Just to replace the pawl might take 3 minutes.
Older white shamno chronarch reel 200E7. Just to replace the pawl- open side cover (the side with the cast control weights). There is a long screw that goes across to the other side the shank of the screw goes through the level wind you will see it. Take out the screw. The screw holds on the cover over the level wind. Remove the cover it
... Read moreonly has one screw. You will now be able to get to the cap that holds the paw into the level wind. Remove the cap and the pawl is exposed. You may have to move the reel handle or tap in it. The pawl comes out and put the new one in turn it until it goes all the way in. Replace the cap just barely beyond finger tight. And reassemble the rest. It\'s really simple maybe 3 minutes. There are some really great YouTube videos. Look at YouTube for directions on replacing the shaft. I have a piece of heavy cardboard with finish nails poked through and super glued in place. I also drew a simple reel and poked holes so I could put the screws back in the proper place. As you take parts off slide them down on the finish nails. I get one of my wife\'s good white towels and work on top of it. That way if you drop something it doesn\'t bounce and it\'s easy to find. remember!!!! YouTube is your friend!
Read less
Did you find this story helpful?
Thank you for voting!
Shimano reel missing the pawl cap and line guide pawl. Reel would not work.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
