This is a genuine manufacturer sourced replacement burner tube. It is by Char-Broil for use with some of their grills. This is the main burner that the flames would rise from. Please note, this tube includes the mounting hardware for the crossover tube, 2 cotter pins and 1 stud screw. This burner assembly is made out of stainless steel and it is sold individually. You will need pliers and a screwdriver to replace this burner.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Works perfectly!
Fit exactly where my old ones did, change out was simple.
Guest - June 26, 2019
Verified Purchase
★★★★★
★★★★★
worked great
if you need a part customer service is great help
Guest - September 3, 2019
Verified Purchase
★★★★★
★★★★★
Very well made part . Fit like a glove.
Ordering was easy . I wish shipping was a little faster . Very well made parts ,easy install.
Guest - September 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair,
Got parts for our grill , worked perfect , thank you =ƒÿè=ƒÿè
Guest - April 15, 2020
Verified Purchase
★★★★★
★★★★★
Tops
Superb
Guest - June 17, 2020
Verified Purchase
★★★★★
★★★★★
Exactly what I needed
Call customer service and explain to them what I needed and they were very helpful and that part was exactly what I wanted to buy. Very helpful would buy from them again
Guest - September 2, 2020
Verified Purchase
★★★★★
★★★★★
Great
Everything was as expected. Great parts and prices. Will keep coming back for items that need replaced.
Guest - April 14, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the old burner tubes, attached the igniters to the new ones, connected the flame carryover. Tested
The grill and installed Flame tamers. Put in the new infrared plates
and laid down grates.
Cleaning was biggest part of the job. Four year old grill used at least twice a week summer and winter.
Took off the old parts and replaced its the new reinstalled the starter device
1. Removed the old burners and installed the new ones.
2. Reattached the spark starters.
3. Replaced the emitters and the temperature gauge. No problem with the repair.
tubes were rusted out. Also had to drill out the screw that holds them in at the back of the grill. That being said I had to use a bolt and nut to attach them back into the back of the grill, which meant I had to unscrew the back panel to access the bottom of the hole. If it had\'nt been for that, it would have been a 5 minute fix. Gr
... Read moreill works again! Had a few extra clips left over.
1. Removed the cast iron grates.
2. Removed both rusted emitters.
3. Removed the rusted main burners and replaced with the new ones.
4. Installed the new emitters.
5 Replaced the grates.
Removed the old burners, Clips were corroded and frozen bur got them our with pliers and a little tap. cleaned up the rust areas elsewhere and painted them. Installed the new burners with new clips, fit perfectly, connected the igniters, clips had to be bent out a little more then they snapped in. replaced the IR plates and grates. teste
... Read mored it out and worked like new.
I wish the carry over tube was available when I ordered as that is the only worn out part left in my BBQ. Looking on Amazon for a replacement now.
I l;like this kit as it come with all the hardware I needed to make the burner repair. Excellent product.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10294771
Manufacturer Part Number: G356-2200-W1
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/parts/bbq/grill/elements-and-burners/"},{"position":3,"name":"G356-2200-W1","title":"G356-2200-W1","url":""}]
