eReplacementParts.com
877-346-4814
Black and Decker Parts
Preferred Partners of

Fan

Part Number: 241125-00
DeWALTBlack and Decker
Availability: 25+ in stock
Price: $19.26
Order within the next 5 hours
and your part ships today!
Product Information
Manufacturer: DeWALT, Black and Decker
Product Number: 241125-00
Classification: Part
Weight: 0.30 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine Black and Decker/Craftsman replacement part , it is sold individually.
The purpose of the 241125-00 Fan is to keep the electric motor cool by creating an air flow up towards the motor.
At times dirt, rocks and other debris may damage the fan and it will need to be replaced. Otherwise the heat produced by the motor will damage it.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Black and Decker
Expand the 53 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Lawn Mower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Blade Insulator - 241381-01
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Replaced the damaged fan and blade insulator
Held the blade with a thick glove on my hand, then removed the nut holding the blade on, and removed it. Removed the broken fan and reinstalled the new one on the shaft, replaced the worn blade insulator. Installed the blade and tightened the blade holding bolt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Blade Spacer - 680812-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
Broken fan and worn spacer
I removed the blade nut with an impact wrench. Then removed the spacer, insulator and blade. I was able to pry the fan off of the shaft. I replace the blade spacer above the fan. With deep socket I was able to tap the fan back in the same place as the old one. I replaced the blade, insulator and spacer. Then tightened the blade bolt with a socket wrench by wedging a 2x4 to hold the blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Blade Insulator - 241381-01
Spacer - 092715-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Electric fan on mower hit rock.
Unbolt, remove 3 parts. Resemble fan and blade. Worked great, finished just in time for son to mow.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, 2\\\'x4\\\'x1\\\' piece of wood
Lawn mower mulching fan broke
1. Removed mower blade with socket set and wood block.
2. Removed broken fan; replaced with new fan.
3. Replaced mower bade; tightened blade per specs.
4. Done!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Fan blades missing
Remove the nut holding the blade on
Remove the spacer and insulator
Remove the old fan
Install the new fan
Install the blade assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Fan blades broke
1) I removed the bolt holding the cutting blade.
2) Removed the cutting blade
3) The fan slid right off
4) The replacement fan slid right on
5) I reattached the cutting blade and bolt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Mulching Blade (19-Inch) - 242381-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Fan was broken, blade was beat up
Took off old blade and pieces under it.
Memorized the order.
Took off old fan.
Put on new fan.
Replaced pieces between fan and blade.
Put on new blade.
Replaced bolt to hold it all.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Adjustable Wrench
Lawn mower fan was broken.
1. Removed nut and washers
2. Removed blade
3. Removed defective fan
4. Installed new fan
5. Re-installed blade
6. Re-installed nut and washers

Be sure and wear gloves to prevent any injury by the blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Blade Insulator - 241381-01
Blade Spacer - 680812-00
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Lawn mower fan broke
Removed blade.
Pried off broken fan
Replaced fan with new fan
Slid on blade spacer
Slid on blade
Slid on blade insulator
Attached blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Fan - 241125-00
Blade Insulator - 241381-01
Mulching Blade (19-Inch) - 242381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, 19mm/ 3/4inch socket and ratchet
Blade was not spinning in time with the electric motor
This mower was being thrown out by its previous owner. I picked it up off the curb.
1. Removed nut securing the blade with a 19mm socket.
2. Removed blade insulator.
3. Removed the fan, found the fan had cracked and the center hub was no longer part of the fan blade assembly. This is a common problem with the B&D mower. the fan assembly strikes nuts protruding form the bottom of the mower.
Ordered parts using the exploded diagram on e replacements web-page. the blade was dull so I ordered one too.
Reinstalled parts in reverse order. Fan blade assembly, mulching blade, blade insulator, and metal washer. Tightened securing nut. Rotated blade to insure there was no interference. plugged mower in and tested on a small area of my lawn. Worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
12 Reviews
Click to filter by ratings:
5 stars
11
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Fast and easy
    Correct part with fast easily trackable delivery!
    Kenneth - 4 days ago Verified Purchase
    Easy to find the right part with detailed diagrams. Easy fix.
    Part was brand new. Easy to reassemble the mower with detailed parts breakdown. Mower works like new. Recommend this site to all, rookie to experienced mechanic.
    Thomas - 29 days ago Verified Purchase
    Lawn Mower Fan
    Received on time. Mower worked great.
    Stewart - June 16, 2022 Verified Purchase
    looks just like the old one
    exact fit works great thanks
    Guest - November 9, 2021 Verified Purchase
    This Mower Fan is an Exact Replacement to my old one!
    The mower fan looks like an exact duplicate to the broken one I removed from my mower, it is like it came out of the same mold using the same material. Purchased to Received Time was quick! Thanks!
    Guest - October 11, 2021 Verified Purchase
    perfect product for the repair, and speedy shipment.
    great job!
    Guest - June 4, 2020 Verified Purchase
    Fast and reasonable
    We've ordered a few parts from here and everytime the part is accurate, reasonably priced and has a fast delivery. We will continue to use ereplacementparts well into the future!
    Guest - April 22, 2020 Verified Purchase
    Easy Repair, excellent advice
    I received both fan and switch for the MB450 MULCHER/MOWER. Shipped faster than promised, easy to install and works like a charm. Thank you.
    Frederic - September 3, 2019 Verified Purchase
    Perfect replacement for Lawn Hog
    Worked great for my old Lawn Hog 19" mulching electric mower. Hope to get a few more seasons of cutting before replacing!
    Kenneth - August 22, 2019 Verified Purchase
    easy repair
    part fit great - mower like new
    Guest - August 15, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    NEXT >
    Product Information
    Manufacturer: DeWALT, Black and Decker
    Product Number: 241125-00
    Classification: Part
    Weight: 0.30 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Fan
    Articles:
    Step-by-step instructions for removing and installing the fan on your Black and Decker electric mower....
    October 13, 2017

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal