Medium
30-60 minutes
This is a genuine OEM approved replacement part designed for use with chop saws. This item holds carbon brush against the armature. It is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately.
To replace this assembly you would need a screwdriver and pliers.
• First remove screws holding the cover together
• Carefully remove two halves of the housing to gain access to armature and brush holder
• Remove the screws holding brush holder to the trigger
• Remove the armature assembly and the brush holder
• Install the new brush holder, brushes and the armature
• Reassemble and test your tool
Brush Holder 622440-00
OEM part for: DeWALT, Black and Decker
Part Number: 622440-00
$3.99
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 14 machines
DeWALT
D28700 Type 1 Chop Saw View Diagrams & Manuals
D28715 Type 1 Chop Saw View Diagrams & Manuals
D28715 Type 2 Chop Saw View Diagrams & Manuals
D28715X (Type 2) 14 Chop Saw View Diagrams & Manuals
D28700-AR (Type 1) Chop Saw Power Tool View Diagrams & Manuals
D28700-B2 (Type 1) Chop Saw Power Tool View Diagrams & Manuals
D28700-B3 (Type 1) Chop Saw Power Tool View Diagrams & Manuals
D28715 (Type 3) 14 Chop Saw Power Tool View Diagrams & Manuals
GR870 (Type 1) 14 Chop Saw Power Tool View Diagrams & Manuals
GR871 (Type 2) 14 Chop Saw Power Tool View Diagrams & Manuals
GR871 (Type 3) 14 Chop Saw Power Tool View Diagrams & Manuals
DWE7491RS (Type 10) 10in Jobsite Tbl Saw Power Tool View Diagrams & Manuals
DWE7491RS (Type 3) 10in Jobsite Tbl Saw Power Tool View Diagrams & Manuals
Black and Decker
GR870 Type 1 14 Chop Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Chop Saw Parts
- Saw Parts
Repair Videos ?
Watch the Repair Video for
Brush Holder
Articles:
|
Brush holder hammered? Step-by-step instructions show you how to remove and install the carbon brush holder on your DeWA...
June 28, 2016
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great parts
Great parts,arrived quickly.my chopsaw is working good
Victor -
December 8, 2021
Verified Purchase
at the least the parts fit great.
the parts were as good as OEM parts.
Bill -
December 1, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Holder
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Brush lead broken off brush body and warped the holder due to high heat generated.
Thomas - August 7, 2020
Tool Type
Chop Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver, small flat file
Parts Used
1. Removed end cover (2 screws)
2. removed brush holder caps and remove old brushes.
3. Loosen set screw holding brush holder. Removed the warped brush holder with pliers & screwdriver. Case was slightly warped due to the excess heating so the holder came out in several pieces.
4. Clean rotor contacts with electrical contact cleaner to remove carbon buildup.
5. Used small file to smooth out case sides for new brush holder to fit back in. Inserted new holder and tighten set screw back down.
6. Install new pair of brushes and holder caps. Reinstall end cap.
7. Test ran chop saw to ensure a good repair.
2. removed brush holder caps and remove old brushes.
3. Loosen set screw holding brush holder. Removed the warped brush holder with pliers & screwdriver. Case was slightly warped due to the excess heating so the holder came out in several pieces.
4. Clean rotor contacts with electrical contact cleaner to remove carbon buildup.
5. Used small file to smooth out case sides for new brush holder to fit back in. Inserted new holder and tighten set screw back down.
6. Install new pair of brushes and holder caps. Reinstall end cap.
7. Test ran chop saw to ensure a good repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
broken connector & backed wire ends .
mark - May 14, 2019
Tool Type
Chop Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, ....
Parts Used
Have a problem with brush wire connector. The wire end was bunt and a new end was installed
which does not hold well , in use it comes off . Have go back into saw to fix . No part number for the right kind of connector .
which does not hold well , in use it comes off . Have go back into saw to fix . No part number for the right kind of connector .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
