Blade,&#8203;&#8203; Mulching (upper) 72531-VE2-020

Washer, Spring (10mm) - 90502-VG3-000

Wheel Nh164 (grip Gray) (rr.) - 44710-VE2-M02ZD

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Worn-out drive wheels, Blade Replacements

Blade Replacement
1 Turned mower on side
2 Removed two bolts and spring washers
3 Pulled blades off the spindle
4 Replaced new blades
5 Replaced two bolts and spring washer

Rear wheel replacement
1 Removed axle bolt and washers
2 Removed drive gear from the old wheel
3 Placed old drive gear onto new wheel
4 Placed new wheel on mower

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blades are getting dull & sharpened twice .It’s time to get a new pair of blades for the next spring.

Replaced the blades from old & dull (sharpened 2X) with a new pair for next spring. Easy change the blades with socket wrench & a 2x4x@ 18in piece lumber for hold the moving blades while loosen the bolts & tighten respectively.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

V-belt (3l-38) - 22431-VG3-B50

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, 4x4 and impact driver

Dull blades and a worn out drive belt

Easy, just did it

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set

Replacing The Original Blades

1 Removed gas from lawn mower
2 Undid spark plug
3 Stood lawn mower up
4 Removed the two bolts from the original blades
5 Replaced with new ones
6 Re-tighten bolts
7 Reversed procedures

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Front Wheel - 44710-VL0-L02ZB

Rear Wheel - 42710-VE2-M02ZE

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set

New blades and wheels

Very easy repair. All parts were a perfect match and very easy to install. Like a new mower.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

Blades were unsafe to sharpen

Used a 5/8 socket "rated" at 1/2" as you need a bit of muscle. Looked at the old, and replaced in that order(very important). Also, put a couple "quick sprays" of WD-40 on the bolts. Never hurts...cleaned the under deck of stuck grass.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

New blades

Two bolts is all,I used a piece of wood to keep the blade from moving as I loosened the bolts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench

Blades were rusty and old.

Removed the old blades and replaced with the new.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Mower blades were old

Blades held on by two nuts. Turned machine sideways and used right-sized sockets to remove and replace blades. Easy change!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used: