Medium
30-60 minutes
This tie rod is supplied directly from the original equipment manufacturer. The metal component is made for use with many lawn and garden tractors. This item is often fastened to the king pin and the steering shaft, keeping the tractor wheels in proper alignment. A screwdriver, socket set and wrench set are needed for the installation. The tie rod is sold individually. Please refer to the specific manual for the repair instructions.
Tie-rod 7024935YP
OEM part for: Snapper
Part Number: 7024935YP
$39.97
In Stock
Order within the next 7 hours and your part ships today! 
Compatibility
This Tie-rod will fit the following 155 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Snapper
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Tractor Parts
This part replaces obsolete part #: 7024935
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great part
Arrived quickly.Perfect fit.works like new again
Guest -
August 11, 2023
Verified Purchase
The part worked as advertised and it arrived sooner than expected.
The part was packaged very well to prevent harm during shipping. It arrived in perfect condition.
Guest -
April 15, 2023
Verified Purchase
If one fails, replace both
One failed, and due to age of unit, I was right to order two. When making the swap out, found the remaining one frozen on one end, so am glad I had ordered two. Old unit now steers a lot tighter and I have a much better control of mower in making turns. Easy repair: 7/16 and 1/2 wrench is all that's needed and took less than 10 minutes. Stand mower on rear supports for easiest access to a fairly tight repair area.
Larry -
May 25, 2021
Verified Purchase
Tie Rod Replacement
Quality replacement part with OEM fit and finish. Glad this company exist to help us keep good machines working great. If you're replacing one (1) tie rod; suggested you replace both. They receive equal wear and the one you avoid replacing now will soon prove to be worn out as well.
Hogan -
October 6, 2020
Verified Purchase
Easy repair, fit as expected
Lawnmower is up and running again. Part was expected on a Friday, didn't receive it til Monday
Guest -
June 25, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Tie-rod
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Tie rod worn out and disloged.
Michael - August 11, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Parts Used
Tilted mower, secured steering shaft and replaced tie rods.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tie rod end worn out (came apart) and bearings worn.
Fred - June 19, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, hammer
1. Jacked up front end of mower.
2. removed nuts/washers from tie rod ends.
3. Replaced new tie rods with old nuts/washers.
4. Removed hub caps from front wheels and cleaned off excess grease.
5. Removed cotter pin, washer, wheel, inner washers, seal, and cap dust cover.
6. Removed inner and outer bearings with screw driver and hammer.
7. Replaced bearings and put everything back in reverse order.
8. Added grease to wheels between the bearings and replaced the hub caps.
2. removed nuts/washers from tie rod ends.
3. Replaced new tie rods with old nuts/washers.
4. Removed hub caps from front wheels and cleaned off excess grease.
5. Removed cotter pin, washer, wheel, inner washers, seal, and cap dust cover.
6. Removed inner and outer bearings with screw driver and hammer.
7. Replaced bearings and put everything back in reverse order.
8. Added grease to wheels between the bearings and replaced the hub caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
