We Sell Only Genuine Skil® Parts.
Skil Grinder Parts & Models
Popular Skil Grinder Parts
This cord is a genuine OEM replacement part and is sold individually.
Power Cord Specifications:
2 Wires.
18 Gauge.
2 Prongs.
6-1/2 Feet Long.
It is constructed with thick insulation for long service life and a strong two-prong plug. This cord is compatible with the tools listed below. It can work for other applications and for other tools as well, but compatibility is not guaranteed.
Installation of this part requires the new cord wires be stripped and to fit correctly into the wire terminals.
Genuine OEM replacement part designed for specific Grinders. This part is made out of Metal and it is Sold Individually. This backing Locknut used on to Hold the Grinding Wheel to the Spindle/Shaft.
5/8"-11
Genuine OEM replacement part designed for use with some Grinders. This part is made out of Metal and it is Sold Individually. This backing Locknut is used to Hold the Grinding Wheel to the Spindle/Shaft.
5/8"-11
This is a Genuine OEM replacement part used on Grinders. This Wrench allows you to secure or remove a Grinding Disk or a Blade. Angular profile of this item makes tightening/loosening the Flange Nut easy. This wrench is made from Metal and it is Sold Individually.
Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.
• Worn brushes are frequently the cause of a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.
Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
This Grommet (Cord Guard) is a Bosch/Skil genuine replacement part, this item is sold individually.
It is a direct replacement for a damaged or missing cord guard.
Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool.
Over time cord guards will deteriorate and eventually require replacement.
Keeping a strong cord guard on your tool will help will cord life.
This cord guard is compatible with the tools listed below .
This cord is a genuine OEM replacement part and is sold individually.
Power Cord Specifications:
2 Wires.
18 Gauge.
2 Prongs.
6-1/2 Feet Long.
It is constructed with thick insulation for long service life and a strong two-prong plug. This cord is compatible with the tools listed below. It can work for other applications and for other tools as well, but compatibility is not guaranteed.
Installation of this part requires the new cord wires be stripped and to fit correctly into the wire terminals.
Genuine OEM replacement part designed for specific Grinders. This part is made out of Metal and it is Sold Individually. This backing Locknut used on to Hold the Grinding Wheel to the Spindle/Shaft.
5/8"-11
Genuine OEM replacement part designed for use with some Grinders. This part is made out of Metal and it is Sold Individually. This backing Locknut is used to Hold the Grinding Wheel to the Spindle/Shaft.
5/8"-11
This is a Genuine OEM replacement part used on Grinders. This Wrench allows you to secure or remove a Grinding Disk or a Blade. Angular profile of this item makes tightening/loosening the Flange Nut easy. This wrench is made from Metal and it is Sold Individually.
Genuine Bosch replacement part
Set of 2 Carbon Brushes with wire lead attached.
• Worn brushes are frequently the cause of a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.
Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
This Grommet (Cord Guard) is a Bosch/Skil genuine replacement part, this item is sold individually.
It is a direct replacement for a damaged or missing cord guard.
Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool.
Over time cord guards will deteriorate and eventually require replacement.
Keeping a strong cord guard on your tool will help will cord life.
This cord guard is compatible with the tools listed below .
Join our VIP Email list
Receive money-saving advice and special discounts!
Thank you!
Error
Midvale, UT 84047
