Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fits perfectly
i replaced the handle, power cord and cord guard on my 25yo Skil saw. Everything fit together exactly as it should. Is needed to prevent the cord breaking right next to the handle.
Guest - April 25, 2019
Verified Purchase
★★★★★
★★★★★
Good
Parts came on time and look to be decent quality. I had another item in my cart that was dropped without my notice and thus needed but not purchased. Maybe cart system could use a tune up.
Raymond - May 8, 2019
Verified Purchase
★★★★★
★★★★★
Exact Match
This was a perfect replacement part & was very easy to install!
Guest - May 30, 2019
Verified Purchase
★★★★★
★★★★★
works as described
Part works great, just wish Ereplacement would ship using anyone other than Fedex, slower than USPS
Ronald - June 28, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
Arivved quickly
Guest - July 17, 2019
Verified Purchase
★★★★★
★★★★★
AWESOME Easy to install FAST! God Bless : )
Great price Fast to receive!
Guest - November 25, 2019
Verified Purchase
★★★★★
★★★★★
Correct part
Part arrived on time and was the correct part.
Guest - January 16, 2020
Verified Purchase
★★★★★
★★★★★
Skilsaw cord guard replacement
As always I can depend upon Replacement Parts for excellent customer service, ease of ordering original equipment parts for many of my powered tools and appliances. They are my go to source for replacement parts.
Guest - February 17, 2020
Verified Purchase
★★★★★
★★★★★
Exact match
My SkilSaw is happy again!
Guest - March 16, 2020
Verified Purchase
★★★★★
★★★★★
worked as expected:)
The part arrived timely, and was the exact fit for my 1994 Professional Skil-saw.
Thanks, Jerry
Guest - April 10, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the screws from the handle assembly, then unscrew switch from handle and remove the cord clamp. Remove the cord leads from the switch and the ground wire. Discard old cord. Slide the new cord relief onto the new cord. Install the cord leads on the switch , then the ground lead. Attach switch to handle , then put the cord clamp back
... Read more on. Press the handle together. Make sure there are no wires being pinched, then install the handle on to the saw. To replace the brushes. Remove the brush caps with a screwdriver, then remove the old brushes. Install the new brushes, then screw the brush caps back on. Check oil level in the saw and add more if needed.
Unscrew handle halves. Remove screws holding handle to saw and remove. Unscrew wires to trigger and remove. Screw handle half to saw that holds trigger. Install trigger wires to new switch and install into handle. Tuck in the wires as not to get pinched and install second half of handle and screw together. Install screws to a fix handle t
... Read moreo saw. Table or foot repair starts with removing depth adjustment screw by removing retaining clip then handle and increasing nut. Remove nut at front of saw at the table. Remove table. Position table onto saw body and screw front screw and nut. Position rear adjustment arch into threaded stud and replace nut. Adjust the nut so the Table can go up and down. Position the lever so down is tight and up loosens enough to adjust depth. Install keeper e clip. On old table remove adjustment nut and install on new table. Just reverse the process to install. Done. Now the saw will cut square and the honey dos will go easy.
Remove the screws from the right half of the switch handle
Unscrew the switch
Remove the cord clamp
Disconnect the cord wires from the switch and the ground wire
Remove the old cord
Slide the cord relief on the new cord
Connect the cord wires to the switch and connect the ground wire
Screw the s
... Read morewitch in the handle
Attach the cord clamp
Install the handle half
Read less
Did you find this story helpful?
Thank you for voting!
someone let the oil run out on a worm drive saw which destroyed the gear set and welded the bearings
I completely disassembled the saw ,all except the field . identified the parts I needed to replace and ordered online. then I cleaned the gear housing making sure to get all the gear debris out. sand blasted the gear housing the field housing the saw guards and powder coated everything .cleaned and polished the armature contacts .as soon
... Read more as the parts showed up reassembled it .PUT OIL IN IT and was good to go just like new
Install trigger, cord and cord protector on 7-1/4\" Skill mag 77 worm drive saw.
Before starting ensure that saw is unplugged.
1-Remove right side half of saw handle. Inside handle, remove screws that secure cord tail clamp, and trigger, and ground wire. If the cord is to be replaced along with trigger, discard old part
... Read mores. If the old cord is to be reused, remove cord connections from trigger.
2-Install cord tail protector on cord by inserting the wire connectors through the small end of protector. Slide protector toward plus end of cord so about 6 inches of the cord passes through protector. Note-if old cord and cord tail protector is to be used, this step can be skipped.
3-Using appropriate parts secure cord connections to trigger according to diagram that is included with trigger. Note- if this step is not done correctly the saw will not operate and electrical circuit that the saw is connected to will overload, possibly causing damage/ injury.
4-Secure ground to saw body, ensure wires are appropriately positioned so they do not get pinched when the handle case halve is reinstalled. Secure cord with cord clamp and place the end of cord protector into slot behind cord clamp. Align and secure handle case half in place. Be sure not to over torque screws as the plastic parts are susceptible to damage.
Read less
Did you find this story helpful?
Thank you for voting!
On - Off trigger on 27 year old Skil 77 did not work
Used slotted screwdriver to remove half of plastic handle at rear of saw to expose broken switch.
Removed switch and disconnected line and load wires then attached wires to new switch.
Removed male plug at end of saw cord and slid new cord guard onto cord, securing it to handle.
Replaced handle and screws.
Removed
... Read more old brushes and replaced with new brushes.
Tested saw and it worked perfectly.
First I removed the screws from the handle on my 77HD Skilsaw, then I removed the screws from the strain relief and the switch. I then unscrewed the positive and negative leads from the switch and the ground screw from the body of the saw. Pulled the old cord and cord guard out and replaced with the new ones, replaced the leads on the w
... Read moreire, making sure I routed everything properly, tightened all the mounting screws to the proper torque, put the handle back on and tested the function of the saw. Worked perfectly!
Removed covers for brushes then replaced old brushes with new ones. Removed screws from handle assembly then removed screws holding terminals on old power cord. Replaced old cord with new one and replaced the screws. My vintage Skilsaw 825 worm drive is ready for another 50 years of use!
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16639805
Manufacturer Part Number: 3129140001
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/power-tool/circular-saw/caps-and-lids/"},{"position":2,"name":"3129140001","title":"3129140001","url":""}]
