Pruner Parts
Search By Model or Part Number
Most Popular Pruner Replacement Parts
It is sold individually.
By pressing the bulb it will purge the air from the carburetor.
Then fuel will come up from the fuel tank through the fuel line then into the carburetor.
The excess fuel will be forced back into the tank through the fuel return line.
Over time the primer will lose its elasticity or crack and need to be replaced.
The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage.
Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine. This is a double layer air filter.
It is compatible with over 150 machines listed below.
The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.
Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine.
It will ignite the air fuel mixture by the spark.
Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual.
Over time a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors.
It is better to replace a fouled spark plug, rather then trying to clean it.
Popular Pruner Models
Pruner Parts by Brand
Pruner Repair Articles
How to Install a Filter Kit on an Echo Trimmer (Model SRM-225) | How to Fix a 2-Cycle Engine Carburetor |
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225... | This article will walk you step-by-step through the process of repairing a 2-Cycle... |