Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Makita Parts  664820-2 Power Supply Cord

Power Supply Cord

Part Number: 664820-2
Availability: 10 in stock
Price: $27.36
Order within the next 1 hour
and your part ships today!
  • 14 Gauge, 3 Wire, 8 FT
This genuine replacement power supply cord is sourced directly from original equipment manufacturer for use with Makita power tools. It connects to a standard outlet to provide power for the tool. Over time cords can develop kinks and crack requiring replacement. The cord protector is not included, it is sold separately. Please note, this rubber insulated cord is sold individually.

Replacing this power cord i a simple task that should only require a screwdriver.

• Remove the housing
• Disconnect the wires of the old cord
• Remove the old power cord
• Secure the new cord through the cord protector
• Connect the wires
• Reassemble and test the tool
Product Information
Manufacturer: Makita
Product Number: 664820-2
Classification: Part
Weight: 0.83 lbs.
Shipping: Ships Worldwide
Related Products

This part is compatible with the following machines:

Products Compatibility

This item works with the following types of products:

  • • Grinder
  • • Impact Wrench
  • • Sander
  • • Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Brush Holder Cap - 643650-4
Power Supply Cord - 664820-2
Repair Difficulty:
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, wire crimp & cut
Saw would not run. Tested & found no power to the trigger = bad cord.
1. Removed side handle cover
2. Disconnected old cord from trigger and ground lug, removed trigger
3. Removed strain relief clamp
4. Removed cord guard
5. Went to hardware store to buy 3 non-insulated connector eyes
6. Stripped wire ends and crimped connectors
7. Reversed disassembly above.

This cord does not come with non-insulated connectors or stripped wire and exposed strain relief loop. There are no part numbers for crimp connectors needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Power Supply Cord - 664820-2
Tension Spring 5, 5477Nb - 231889-7
Repair Difficulty:
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Wire crimpers.
Worn cord and missing spring
1. Take blade off. Hook spring to the holes on the saw in two places.
2. Put blade back on.
1. Take all of the screws out of the handle area (6).
2. Take handle cover off
3. Take old cord out making sure of what wire goes to what terminal.
4. You will need to have round wire connector ends to put on the new cord.
5. Take off cord protector from old cord and put on to new cord.
6. Re connect new cord wires to terminal.
7. Put saw back together.
If I missed a step I apologize.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion for Power Supply Cord - ( 664820-2 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.