Hoover Upright Vacuum Belts

This genuine OEM supplied part is specially made for use with Hoover vacuums. The purpose of the belt is to drive the brush roller assembly. It is installed on the shaft of the motor and on the end of the brush roller. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams o...

Genuine Craftsman replacement part, this item is sold individually. This the belt that drives the self propelled unit on the vacuums that have that system and use this part number. It is also used on some Hoover self propelled models.

Genuine OEM replacement part, this item is sold individually. The purpose of this belt is to rotate the Brush Roll on the vacuum models shown below. This belt is Style 23. Depending on the model you have, it can be installed in different ways. If possible look how the old belt was installed so it will be easier to replace it.

These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum performance. This pack includes two (2) rubber belts. To replace this item you would need a screwdriver. • Access the vacuum belt and brushroll area • Remove the brush roller and the old belt •...

This is a genuine Hoover-made vacuum belt. The belt fits around the drive shaft and the brush roll. The brush roll is spun when the machine is on and the handle is in the unlocked position. This is a cogged belt, which is designed to fit into notches on the brush roll in order to efficiently transfer power to it. One belt is included per package.

This is a genuine Hoover belt made for stick vacuums. This cogged belt features notches made to align into sprockets in the brush roll. It transfers energy from the motor to the brush roll in order to spin it. This cogged design is efficient and longer lasting than tension-based belts. This belt is made to be changed every one to two years. One belt is included per package.

This is a genuine Hoover-made vacuum belt made for use in the Dial-A-Matic series. The vacuum belt attaches from the motor drive shaft around the agitator brushroll in order to spin it when activated. This flat style belt uses friction to stay in place. Note that the old belt may seem larger than the new one due to stretching during normal use. One belt is included.

This is an original replacement part manufactured for use with Hoover upright vacuums. The special belt is used to link the motor and the power drive unit to engage the self-propel feature of the vacuum. This belt is available as an individual replacement part.

This is a genuine Hoover vacuum belt. It attaches from the motor drive shaft to the brushroll agitator, spinning it when the lower nozzle is in use. This spinning allows the bristles to disturb the fibers of carpet or upholstery, loosening dirt and debris for a thorough cleaning. This flat style belt attaches to the agitator at the end with a gap in the bristles. It is sold individually. Note that...

This replacement drive belt is specially manufactured for Hoover vacuums. It is an authentic OEM sourced replacement part, not an aftermarket alternative. It is the belt that would spin the brush roller. Over time rubber belts tend to stretch and wear our requiring replacement. It is recommended to replace these belts every 6 months to ensure top performance. Please note, this belt is sold individ...