OEM Hoover Upright Vacuum Parts & Accessories

Flat Cloth Belt Set – Part Number: H-AH20065

$15.92

Manufacturer Part Number:: H-AH20065

These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum performance. This pack includes two (2) rubber belts. To replace this item you would need a screwdriver. • Access the vacuum belt and brushroll area • Remove the brush roller and the old belt •...

Brush Roll Assembly

★★★★★

(4)

$18.68

Manufacturer Part Number:: H-303202001

This authentic manufacturer approved replacement brush roll assembly is designed for use with Hoover vacuums. The spinning motion of the brush rolls picks up the dust and dirt from the floor. Over time bristles will wear out and would need to be replaced. It is made out of plastic and it is sold individually. When replacing this part you would need a screwdriver. • Remove nozzle plate • Remo...

Belt-agitator

$5.99

Manufacturer Part Number:: H-38528008

This is a genuine Hoover vacuum belt. It attaches from the motor drive shaft to the brushroll agitator, spinning it when the lower nozzle is in use. This spinning allows the bristles to disturb the fibers of carpet or upholstery, loosening dirt and debris for a thorough cleaning. This flat style belt attaches to the agitator at the end with a gap in the bristles. It is sold individually. Note that...

Belt-stretch 2 Pack

★★★★★

(14)

$5.17

Manufacturer Part Number:: H-AH20080

This genuine OEM supplied part is specially made for use with Hoover vacuums. The purpose of the belt is to drive the brush roller assembly. It is installed on the shaft of the motor and on the end of the brush roller. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams o...

Belt-concept

★★★★★

(1)

$4.13

Manufacturer Part Number:: H-160147

This is an original replacement part manufactured for use with Hoover upright vacuums. The special belt is used to link the motor and the power drive unit to engage the self-propel feature of the vacuum. This belt is available as an individual replacement part.

Cloth Bag Assembly-shakeout

★★★★★

(2)

$21.31

Manufacturer Part Number:: H-43662023

This is a genuine OEM part sourced directly from Hoover. This is a sturdy cloth bag designed to be washable and reusable. It fits inside the housing and is accessed through the bag door. This bag should be replaced when it is too dirty or damaged. One cloth bag is included.

Primary Filter

★★★★★

(6)

$7.51

Manufacturer Part Number:: H-304087001

This is a genuine Hoover-made filter used in WindTunnel and Elite vacuums. It fits inside of the dirt cup lid. This filter is designed to be rinsable; for best performance, rinse it every two months or if System Check Indicator light is on. Replace it when damaged or when rinsing no longer cleans it. This filter is sold individually. To Clean This Filter: • Hold filter under running water for a...

Roller Lifter Assembly

★★★★★

(1)

$12.48

Manufacturer Part Number:: H-440001693

It is an authentic manufacturer-supplied item that is designed for use with Hoover and Royal vacuums. This is an identical replacement for a missing or a damaged roller lifter assembly that was installed on a new equipment. It is the component which supports the unit allowing for easy movement. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. The roller lift...

Agitator Bearing Assembly

★★★★★

(1)

$4.13

Manufacturer Part Number:: H-43267002

This is a genuine OEM replacement part sourced directly from Hoover. A bearing is used on each end of the brush roll agitator, allowing it to spin freely. These parts are used to reduce friction and damage between moving parts. They are designed for a high-wear function and are therefore easy to install and replace. This part is sold individually; note that most machines require a pair of bearings.

Hose Assembly Complete-5.5

★★★★★

(5)

$19.07

Manufacturer Part Number:: H-43434223

This is a genuine Hoover stretch-style hose. It is used with vacuums and blowers. This hose has 1-1/4" openings on either end. It is designed to twist lock into place for quick and easy set-up. This assembly includes one stretch hose, one Latch Ring (part # H-36153021), and one Hose Connector (part # H-12593).

Stair And Upholstery Tool

★★★★★

(6)

$18.17

Manufacturer Part Number:: H-38613040

This is a genuine Hoover accessory tool made for use with SteamVacs and Upright Extractors. It is made to attach easily to the end of the extractor hose. This part features a row of bristles designed to agitate carpet and upholstery fibers in order to clean more thoroughly. This nozzle tool is sold individually.

Floor Brush

★★★★★

(3)

$15.71

Manufacturer Part Number:: H-43414073

This is a genuine OEM part sourced directly from the original manufacturer. This accessory is compatible with all Hoover canisters that have attachments made to fit inside the wand. It features rows of bristles made to agitate the fibers of carpets and upholstery in order to loosen dirt for a thorough clean. This tool is made to lock into place securely and to easily be removed with the press of a...

Hoover Upright Vacuum Parts

Top Hoover Upright Vacuum Models

Popular Hoover Upright Vacuum Parts

Hoover Upright Vacuum Models

Hoover Upright Vacuum Parts

Search By Model or Part Number

Top Hoover Upright Vacuum Models

Popular Hoover Upright Vacuum Parts

Hoover Upright Vacuum Models