The purpose of the 791-182352 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. Over time the Fuel Return Line will become brittle and crack and will need to be replaced.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fuel line
It was the right part great to do business with you!
Guest - May 18, 2019
Verified Purchase
★★★★★
★★★★★
It worked!
The part was installed in less than 10 minutes, and the trimmer started first time.
Guest - June 29, 2019
Verified Purchase
★★★★★
★★★★★
Exactly what I needed .... exact fit!
Fuel return line was an exact fit.
James - July 8, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair - just like original
Easy install, love the parts list for easy ID of the correct replacement part. The trimmer is now 19 years old and still running strong. Most parts are still replaceable. Ryobi 875R
Tom - July 30, 2019
Verified Purchase
★★★★★
★★★★★
Perfect part
Just as advertised, fast and easy.
Danny - August 21, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair worked as expected
Excellent condition, fit perfectly trimmer runs again
Guest - April 28, 2022
Verified Purchase
★★★★★
★★★★★
gas lines
everything was great, quality and service
Guest - May 10, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected
Fit perfectly
Guest - November 2, 2021
Verified Purchase
★★★★★
★★★★★
Excellent description of part. Fit perfectly!
Arrived quickly and fit perfectly. I also liked that your website had a YouTube of how to install on my tiller. Thank you.
Guest - April 26, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair, perfect fit!
I didn't know which line it was but the diagram helped to get me the right one. Perfect fit. Half the price of another replacement parts website.
Garrett - May 24, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Kit came with the filter installed on fuel line, Cut off at the nipple of fuel filter and run line from the outside of tank down thru tank. Use a small piece of wire that you turn into a U at the end of wire, (About 3/8\" shaped U) with some needle nose pliers)! As you push line down from outside of tank about 3 to 4 inches. Stop there an
... Read mored stick 3/8\" U shaped wire down thru fuel neck and (feed fuel line) downward and grab with inserted wire through fuel neck and work the line up to fuel filler neck. Grab line and install filter and pull line down until fuel filter lays on bottom of inside of tank! Pretty easy if you can visualize and use common sense!
Read less
Did you find this story helpful?
Thank you for voting!
The fuel filter needs to come un-attached to the line. There is no way to feed the line up from within the fuel tank
As others have stated, you need to cut the filter off the line. Then cut one of the ends at a sharp angle and feed it into the hole in the tank. With a piece of wire, fish the line up the filler neck, grab the line cut the end square, and re-attach the filter.
Attaching the fuel pick up line and return line to the back of t
... Read morehe carb took a few minutes, because the inside diameter of the line isn\'t much bigger than the metal fitting it attaches to.
Read less
Did you find this story helpful?
Thank you for voting!
Fuel was left in the tank for an extended period and the fuel lines disintegrated.
1. Removed what was left of the old pick-up and return lines.
2. Had to thread the new pickup line from inside the tank.
3. Trimmed end of pickup line to a point with a utility knife in order to thread through the hole.
4. Drilled out the hole in the tank using the next size drill bit.
5. Used an ice pick to catch
... Read morethe end of the pick-up line and direct it into the hole in the gas tank.
6. Once the pick-up line was started in the hole, pulled it through enough to connect to the carb.
7. Installed the return line from outside of the tank and connected to the carb. Had to drill out the hole in the tank similar to the pick-up line.
First and most important \"You DON\'T cut off fuel filter from the fuel pick-up line\"... cut a piece of clothes hanger wire about 10\"-11\" long from the bottom of a clothes hanger and form a half circle approximately 4-3/4\" diameter. then cut about a 1/4\" taper to the end of the fuel pick up assembly line.
Draw diagram of
... Read more fuel tank and fuel line location, Clear fuel line with attached fuel filter connects to end of carburetor and inters thru the forward outside hole in top of tank... the Blue-Green return line connects to the top of carburetor and inters thru the inside rear hole in top of tank.
Not necessary but makes it easier to remove the one torx screw and then remove tank and place in bench vise lightly to hold while inserting fuel line, also makes it easier to clean out any debris in tank.
Remove the cap from the fuel tank, run the wire down into the hole in the top of the tank formed for the fuel line and out through the tanks fill opening, placing the tapered end of fuel line on end of wire (which is just a really loose slip on fit) work them together back into tank and started out the small hole in top of tank... once tapered cut end starts to protrude from the tank grab end of fuel line with fingers and pull thru until filter rest on bottom of tank at about a 45 degree angle.
Then do the exact same thing with the fuel return line.
Reinstall tank and attach fuel and return lines to carburetor.
Sounds intimidating but it really isn\'t... hardest part is actually cleaning off the old broken fuel lines from the barbs on the carburetor, requires being really gentle and patient to keep from damaging the barbs or possibly breaking them. This is where a razor blade or the blade of a small knife comes in handy.
1. Removed the fuel tank (one single bolt) and cleaned out the debris from the old filter.
2. Pulled the new lines through the holes. (Ensure you put the right line through the correct hole).
3. Replaced the throttle cable.
4. Replaced the fuel tank.
5. Connected the fuel lines to the carb.
Did you find this story helpful?
Thank you for voting!
Trimmer would start and run for a little while then quit
1. Removed gas cap
2. Pulled old pickup line , filter, and return line off
3. Took filter off new pickup line
4. Pushed pickup line and return line into gas tank
5. Reattached pickup line to filter
6. Attached both lines to carburetor
I removed old fuel lines which was difficult due to age.
Took new tube, cut the end diagonally, cleaned the hole in the tank, and fed the tube through the hole in the fuel tank.
I fed the line into the tank until I could grab the tube with grabbing tool.
It took at least an hour to get the filter end to slip onto fuel
... Read moretubing. Finally, I used a punch to widen the tube hole, sprayed silicone on the filter end, and slipped the tube onto the filter.
Then, I pulled the line so that the filter lie on bottom of fuel tank.
Finally, I put the line on the male end.
Read less
Did you find this story helpful?
Thank you for voting!
Fuel lines of grass trimmer were deteriorated and required replacement
1. Using screwdriver, removed fuel tank from trimmer
2. Turned over fuel tank to empty all debris
3. Removed old and deteriorated fuel lines from fuel tank
4. Used screwdriver to clean holes for fuel lines
5. Inserted fuel return line into one of the holes in the fuel tank
6. Removed fuel filter from f
... Read moreuel pick-up line
7. Inserted fuel pick-up line into open hole in the fuel tank
8. Used an opened wire hanger to fish the fuel pick-up line through the spout of fuel tank
9. Inserted fuel filter into fuel pick-up line, end that was fished through the spout
10. Pushed fuel filter and fuel pick-up line into fuel tank through the spout
11. Replaced fuel tank back on the trimmer
12. Pulled both fuel lines from fuel tank to ensure that they can be connected to fuel tank
13. Inserted fuel return line onto right-hand line connector on trimmer motor
14. Made sure that the fuel filter laid at bottom inside of fuel tank
15. Inserted fuel pick-up line onto left-hand line connector on trimmer motor
16. Poured gasoline into fuel tank and covered spout with cover
1. Removed the existing fuel return and pick up lines with needle nose pliers and used a hair dryer on high heat to soften the hose around the fitting.
2. Had to cut off the filter off the new fuel line in order to get the line into the fuel tank. It simply shortened the line by 0.5 in, no issues.
3. Fed the lines into fuel li
... Read morenes into the tank.
4. Used a bent wire coat hanger to get the end of the line out of the fuel tank
5. Used a hair dryer on high heat to soften the ends of the lines and used needle nose pliers to slide the lines onto the engine plugs.
6. Reinstalled fuel filter.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9135987
Manufacturer Part Number: 791-182352
Trimmer
- MTD String Trimmer Model 41AD26OG701 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/trimmer/hoses-and-tubes/"},{"position":2,"name":"791-182352","title":"791-182352","url":""}]
_WW_2.gif "Part Location Diagram of 791-182352 MTD Fuel Return Line")
_WW_2.gif "Part Location Diagram of 791-182352 MTD Fuel Return Line")
