This is a genuine manufacturer approved replacement part designed for use with edgers and trimmers. The purpose of this part is to act as a seal for the insulator. This item is made out of compound material and it is sold individually. To complete this repair you would need a screwdriver.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nice Job
all the parts where included and easy to install
John - July 11, 2019
Verified Purchase
★★★★★
★★★★★
Great item at a great price
Great item at a great price fast delivery what else can you ask for, I would love to do business with you again thank you.
Guest - July 21, 2019
Verified Purchase
★★★★★
★★★★★
Great
gasket
Guest - July 19, 2021
Verified Purchase
★★★★★
★★★★★
Perfect
The part I ordered came quickly and is a perfect fit.
Guest - May 11, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair, worked as described
Fitment was right and worked great. No leaks or cracks at all. Would buy again
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Parts fits exactly.
N/A
Guest - June 19, 2019
Verified Purchase
★★★★★
★★★★★
Great place to get parts
Fixed weedeater with no problem
Tony - August 9, 2023
Verified Purchase
★★★★★
★★★★★
Worked well,...however.
I ordered an echo carburetor. It was an original part, and very easy to replace. I had only a minor drawback. The gasket that was sent to me was not the one that I described to the salesperson. I was sent the gasket that attached to the spacer on the carb instead of attaching the the carburetor itself. I had to use the used gasket instead of a new one.
All in all, I would continue to use Replacement Parts in the future. My inconvenience was way less than two dollars.
Guest - April 12, 2023
Verified Purchase
★★★★★
★★★★★
Missing in package.
Missing in package. I had ordered 3 items. Both gaskets were not there. I thought maybe they were in separate letter.
Guest - June 29, 2019
Verified Purchase
June 29, 2019
Hi Michael,
Thank you for your review. Please accept our apologies that the gaskets were missing form your order. We have contacted you privately regarding this situation.
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I decided to replace the primer, clean the carburetor, and replace gaskets.
GÇó Take off the cover and spark plug boot.
GÇó Disconnect fuel lines from carb, and loosen carb to remove the choke and throttle cable.
GÇó Open carb and clean the internal parts using aerosol carburetor cleaner.
GÇó Reassemble carburet
... Read moreor using the gaskets in the kit and attach choke, throttle cable, and fuel lines.
GÇó Reassemble the air cleaner and install the gaskets and put the cover back on.
Runs good now!
Read less
Did you find this story helpful?
Thank you for voting!
The Insulator gasket was dried out and tore apart as I removed it.
Remove air filter cover. Remove mounting screws and carburetor assembly. Remove and replace gasket and broken insulator and align new one in exact position and reinstall carburetor with mounting screws. Reinstall air filter and cover.
Removed old unit and replaced it. I take pics before I start and this way I have everything I need to make a solid repair. Have used Replacement parts for years and never had any problems. A great source for just about any part you need.
1. Removed carb tore down
2. Soaked in carburetor dip tank
3. Cleaned out all orifices
4. Re built carb carefully put together
5. Spark plug was bad too.
Did you find this story helpful?
Thank you for voting!
would not start nor run - torn intake gasket - OLD/BAD fuel mix
rebuilt/cleaned/refreshed carb, just for grins, re-installed with new intake gaskets. Flushed all fuel and air lines on unit with carb cleaner.
Still something wrong, though. Starts, but will not run at required RPM. need to continue troubleshooting. Was fine until I inadvertently added old OIL and old GAS with ethanol.
... Read moreSince then, nothing but trouble :-(
With the new parts I ordered. I was a fairly simple fix. Make sure to order the gasket kit ,too. Also if it\'s and older machine buy new gas line kit. While the carb is off you should change the lines.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10053460
Manufacturer Part Number: V103001360
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/trimmer/seals-and-gaskets/"},{"position":2,"name":"V103001360","title":"V103001360","url":""}]
_(290323__Up)_WW_2.gif "Part Location Diagram of V103001360 Echo Intake Gasket")
_(290323__Up)_WW_2.gif "Part Location Diagram of V103001360 Echo Intake Gasket")
