Part Location Diagram of 753-06240 MTD Fuel Tank Assembly w/Fuel Lines (includes 26)
See part A-33 in the diagram
( Grid squares measure 1x1 inch )

Fuel Tank Assembly w/Fuel Lines (includes 26) 753-06240

Manufactured by:
MTD
ERP Number:
ERP9119304
Part Number:
753-06240
Original Equipment Manufacturer ?
  Works with your model  41AD480C980!
Special Order

Easy 

15 - 30 mins 

(12 rated repairs) ?
  Works with your model   41AD480C980!

Product Description

?

This is an authentic fuel tank assembly for a trimmer. This assembly includes the fuel tank, fuel lines, and a fuel cap. Please note that the tabs used to secure the tank are sold separately. Replacing this fuel tank assembly will solve a leaking fuel tank, deteriorated fuel lines, or a broken fuel cap. If your fuel tank is leaking, this assembly should solve the issue. Never run your equipment with a damaged fuel tank, as this is unsafe. Before making this repair, be sure to drain the gas tank.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Craftsman
  • MTD
  • Cub Cadet
  • Yard Machines
This part works with the following products:
  • Trimmer
  • Tiller
  • Edger
Part# 753-06240 replaces these:
753-06240,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(23 Reviews)
Click to filter by ratings:
  • 5 stars
    23
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Do you carry fuel lines for the Craftsman Weedwacker model 316.79196?Thanks
Jim For model number 316.79196 - April 20, 2023

Hi Jim, Thank you for your question. The fuel lines are sold with the fuel tank. The part number for the fuel tank is 753-06240. We hope this helps!

eReplacementParts Team
April 20, 2023

Did this question help you?
Thank you for voting!
Hello, I need a new primer bulb and 2 new gas lines as well as a new air filter for this unit. Can you also tell me which line goes to the fuel filter and which tube on the carburetor and which is the return.Thanks very much
Thomas For model number TB516EC 4 stroke edger - December 27, 2022

Hello Thomas, Thank you for your inquiry. Researching the model number that you have provided, the primer bulb is only available as part of the carburetor assembly-part# 753-06258A. The fuel lines are only available as part of the fuel tank and there are new versions depending on your model-the return line should be the blue one and the fuel line is the black one. The earlier versions from 2012-2017-the tank is part# 753-06240, and the newer version from 2018 to present the fuel tank is part# 753-06797. The air filter is part# 753-05996. Good luck with your repair.

eReplacementParts Team
December 27, 2022

Did this question help you?
Thank you for voting!
I have a Troy Bilt 4 stroke edger. The fuel lines and primer bulb have cracked. So has the air filter element. I need 2 new gas lines, primer bulb and filter element.
Tom For model number TB516EC - December 27, 2022

This Tank 753-06240 is a complete part assembly that includes the cap and fuel lines. Line Trimmer Air Filter 753-05996. The Bulb is sold on the Carburetor 75306258A . We hope this helps.

eReplacementParts Team
December 27, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(12 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Tubes from gas tank disintegrated

JAMES from STOCKTON, California

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-06240
Replaced gas tank and connected integral tubing.
Did you find this story helpful?
Thank you for voting!

Gas wasn\'t coming from the fuel tank to run the tiller

Charles from Clayton, Indiana

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
753-06240
Removed the cover
Removed the gas tank and the fuel lines, and made sure I kept pads
Installed the new tank with the pads
Replaced the cover
Did you find this story helpful?
Thank you for voting!

Primer fuel line was dry rotted from age.

Mike from Middletown, New Jersey

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
753-06240
1. Removed screws holding outer engine cover.
2. Pulled back outer engine cover and removed old gas tank.
3. Reused rubber mounting feet from old tank.
4. Inserted new tank.
5. Refastened outer engine cover.
6. Connected both new fuel lines to correct inlet tubes on carb.
7. Fueled up.
8. Pr imed up.
9. Started up.
Did you find this story helpful?
Thank you for voting!

Gasoline disolved the hoses and interior parts of fuel tank.

james from San Jose , California

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
753-06240
Removed the 3 T2 screws on top of tiller. Found I could just back them out enough to get the old tank out. Reverse the process to replace the tank. Be sure to re tighten the 3 top screws. Connect the new fuel lines. Fill with clean gas. The primer bubble also need to be replaced. Found a gas line repair kit at Lowe\'s for 10 bucks. It com e with new line and assorted primer bubbles. Checked the spark plug and it fired right up.
Did you find this story helpful?
Thank you for voting!

Fuel line was cracked at Fuel Tank entrance/ exit.

Terry from Fernandina Beach, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
753-06240
Removed 4 Phillip screws from top plate. Disconnected fuel lines from carburetor and removed fuel tank. Installed new tank. Connected fuel lines to carburetor and reinstalled top plate. Added gas,Also installed new air filter. Started on 4-5 pulls. Ran Great !!
Did you find this story helpful?
Thank you for voting!

Fuel lines cracked fuel tank leak

Jim from Cincinnati, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
794-00082, 753-06240
Followed the step by step instructions included on line.
Did you find this story helpful?
Thank you for voting!

Fuel lines were old and cracked.

William from SHELBYVILLE, Kentucky

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
753-06240
The handle had to be removed and reinstalled. The fuel tank is held in place by a cross-bar on the handle and the motor housing.
Did you find this story helpful?
Thank you for voting!

Broken fuel

Dale from Barberton, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
753-06240
Removed tank and fuels and reinstalled new tank and fuel line
Did you find this story helpful?
Thank you for voting!

Would not run

Patrick from Columbia, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
753-06240, 753-05996
Relaxed carburetor and fuel tank
Did you find this story helpful?
Thank you for voting!

Gas lines old and cracking.

William from LOUISVILLE, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
753-06240
Removed old tank and gas lines. Attached new tank and lines. The tank came with the lines already in place; all I had to do was screw the tank to the trimmer and insert/attach lines at proper spot.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9119304
Manufacturer Part Number: 753-06240
Brand Model Number Description
MTD 21AK144G799 Tiller - MTD Tiller Model 21AK144G799 Parts
Cub Cadet 21AK148G912 Tiller - Cub Cadet Tiller Model 21AK148G912/2014 Parts
MTD 21BK144G799 Tiller - Tiller
MTD 21CK144G799 Tiller - Tiller
MTD 25A-516-799 Edger - MTD Edger Model 25A-516-799 (25A516799, 25A 516 799) Parts
MTD 25B-515-799 Edger - MTD Edger Model 25B-515-799 (25B515799, 25B 515 799) Parts
Craftsman 31629937 Tiller - Craftsman Tiller Model 316.29937 (31629937, 316 29937) Parts
Craftsman 316299370 Cultivator - Cultivator
Craftsman 316299371 Cultivator - Cultivator
Craftsman 316299372 Cultivator - Cultivator
Craftsman 31677238 Edger - Craftsman Edger Model 316.77238 (31677238, 316 77238) Parts
Craftsman 316772380 Trimmer - Edger
Craftsman 316773800 Edger - Edger
Craftsman 31679121 Trimmer - Craftsman String Trimmer Model 316.79121 (31679121, 316 79121) Parts
Craftsman 316791210 Trimmer - Trimmer
Craftsman 316791700 Trimmer - Trimmer
Craftsman 31679184 Trimmer - Craftsman String Trimmer Model 316.79184 (31679184, 316 79184) Parts
Craftsman 316791840 Trimmer - Trimmer
Craftsman 316791841 Trimmer - Trimmer
Craftsman 31679191 Trimmer - Craftsman String Trimmer Model 316.79191 (31679191, 316 79191) Parts
Craftsman 316791910 Trimmer - Gas Trimmer
Craftsman 31679193 Trimmer - Craftsman String Trimmer Model 316.79193 (31679193, 316 79193) Parts
Craftsman 316791930 Trimmer - String Trimmer
Craftsman 316791931 Trimmer - Trimmer
Craftsman 316791932 Trimmer - Trimmer
Craftsman 31679196 Trimmer - Craftsman String Trimmer Model 316.79196 (31679196, 316 79196) Parts
Craftsman 316791960 Trimmer - Trimmer
Craftsman 316791961 Trimmer - Trimmer
MTD 41AD429C995 Trimmer - MTD String Trimmer Model 41AD429C995 Parts
MTD 41AD470C900 Trimmer - MTD String Trimmer Model 41AD470C900 Parts