This filter is an authentic OEM replacement part sourced directly from the manufacturer. It is commonly used in MTD and Troy-Bilt tillers and cultivators. This part filters the air entering the carburetor. Without a proper air filter, the machine may stop running. It should be replaced if it is worn or clogged beyond cleaning. It is sold individually, and a screwdriver is needed to replace it.
Spark plug was good and getting spark. Fuel was clean with no trace of moisture. Tines were clear of vines and weeds. Good compression and full of oil. Spark shield was clean and clear. This left only a fuel problem. Replaced carb ( no kit available ) filled with new fuel and it started right up. Hope to get five more years of great servi
... Read morece out of machine.
1. Removed six screws holding top plate
2. Pulled plug wire and removed old spark plug, gapped me one, and installed new one (see owners manual)
3. Removed old fuel tank and rubber mounts. Be sure to note there were two fuels lines, so proper orientation is critical.
4. Install rubber mounts and tank, then cut fuel lin
... Read morees to length and install those.
5. Reinstall top plate with the six screws
6. Fuel filter change out per owners manual was a breeze.
7. All done.
1. Removed the plastic guards surrounding the engine.
2. Removed the muffler for better access to spark plug.
3. Removed old spark plug and replaced new spark plug.
4. Installed new air filter.
5. Replaced muffler and plastic guards.
6. Job completed.
Took nuts off the old cover with a nut driver. Pulled the old cover off. Put the new one on. Put nuts back on. Tightened with a nut driver. Easy install.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9117898
Manufacturer Part Number: 753-05996
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(2009)_WW_1.gif "Part Location Diagram of 753-05996 MTD Cultivator Air Filter")
_(2009)_WW_1.gif "Part Location Diagram of 753-05996 MTD Cultivator Air Filter")
