This is an authentic fuel tank assembly for a trimmer. This assembly includes the fuel tank, fuel lines, and a fuel cap. Please note that the tabs used to secure the tank are sold separately. Replacing this fuel tank assembly will solve a leaking fuel tank, deteriorated fuel lines, or a broken fuel cap. If your fuel tank is leaking, this assembly should solve the issue. Never run your equipment with a damaged fuel tank, as this is unsafe. Before making this repair, be sure to drain the gas tank.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
gas trimmer
very satisfied with my purchase of a fuel tank for my craftsman gas trimmer, the part was readily available and the price was reasonable. I received the product in a timely manner and am very satisfied. Thank you
Guest - May 8, 2019
Verified Purchase
★★★★★
★★★★★
Quick order and shipping
The part was exactly as ordered and received very quickly. Installation was simple and my weed eater works like new.
Guest - April 12, 2020
Verified Purchase
★★★★★
★★★★★
Excellent. Worked great.
Was same exact part. Great fit. Just right.
Guest - April 19, 2020
Verified Purchase
★★★★★
★★★★★
Great fit
The part arrived in excellent condition,was very easy to install .my tiller operate like new.
George - May 31, 2020
Verified Purchase
★★★★★
★★★★★
Received quickly, installation went well
Part was perfect fix.
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Great Experience
The part I ordered arrived fast and exactly as ordered. I have ordered from ereplalcement before and have always been very happy with the experience.
Guest - June 19, 2020
Verified Purchase
★★★★★
★★★★★
Great parts
Fit perfect
Guest - July 14, 2020
Verified Purchase
★★★★★
★★★★★
Easy & simple repair
Troy built, lawn edger tank replacement, ordering tank was easy, very helpful lady took my older.
After watching YouTube video of replacing tank, the temp was simple to replace.
Guest - August 22, 2020
Verified Purchase
★★★★★
★★★★★
Plug and Play!
10 minutes to repair. Easy peasy and fast shipping too. Thanks. A++
Guest - April 5, 2021
Verified Purchase
★★★★★
★★★★★
Just the company I was looking for!
Since I own many Craftsman items it was great to find a company I could get parts from. The shipping was fast, the price was reasonable and the info on their site is perfect. Thank you!!!
Peggy - May 17, 2021
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed screws holding outer engine cover.
2. Pulled back outer engine cover and removed old gas tank.
3. Reused rubber mounting feet from old tank.
4. Inserted new tank.
5. Refastened outer engine cover.
6. Connected both new fuel lines to correct inlet tubes on carb.
7. Fueled up.
8. Pr
... Read moreimed up.
9. Started up.
Read less
Did you find this story helpful?
Thank you for voting!
Gasoline disolved the hoses and interior parts of fuel tank.
Removed the 3 T2 screws on top of tiller. Found I could just back them out enough to get the old tank out. Reverse the process to replace the tank. Be sure to re tighten the 3 top screws. Connect the new fuel lines. Fill with clean gas. The primer bubble also need to be replaced. Found a gas line repair kit at Lowe\'s for 10 bucks. It com
... Read moree with new line and assorted primer bubbles. Checked the spark plug and it fired right up.
Read less
Did you find this story helpful?
Thank you for voting!
Fuel line was cracked at Fuel Tank entrance/ exit.
Removed 4 Phillip screws from top plate. Disconnected fuel lines from carburetor and removed fuel tank. Installed new tank. Connected fuel lines to carburetor and reinstalled top plate. Added gas,Also installed new air filter. Started on 4-5 pulls. Ran Great !!
Removed old tank and gas lines. Attached new tank and lines. The tank came with the lines already in place; all I had to do was screw the tank to the trimmer and insert/attach lines at proper spot.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9119304
Manufacturer Part Number: 753-06240
Trimmer
- MTD String Trimmer Model 41AD470C900 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Tank or Container","title":"Tank or Container","url":"/parts/lawn-and-garden/trimmer/tanks-and-containers/"},{"position":2,"name":"753-06240","title":"753-06240","url":""}]
