Part Location Diagram of 90566944 DeWALT SPRING, SPOOL COVER
See part 10 in the diagram
Replacing your Black and Decker Trimmer SPRING, SPOOL COVER
( Grid squares measure 1x1 inch )

SPRING, SPOOL COVER 90566944

Manufactured by:
DeWALT
ERP Number:
ERP18988535
Part Number:
90566944
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(59 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine Black and Decker replacement part, this item is sold individually. The purpose of the 90566944 Spring is to hold the spool in place on the Trimmer shown below. It is placed between the spool and the spool cover. The cover snaps into the spool housing by means of the two tabs on both sides of the cover.

Troubleshooting

This part works with the following brands:
  • Black and Decker
  • Craftsman
This part works with the following products:
  • Trimmer
  • Lawn Mower
Part# 90566944 replaces these:
  • 90566944
  • P90566944

Videos For installing this part.

?
Replacing your SPRING, SPOOL COVER

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(19 Reviews)
Click to filter by ratings:
  • 5 stars
    18
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
The orange cap came off and a slung the string advancement parts out.
Carl For model number ST8600 string trimmer - November 10, 2023

Hello Carl, thank you for writing in. Under the orange cap is the Spring 90566944, Lever Assembly 90567077 and Spool & Line 90626046. We hope this helps.

eReplacementParts Team
November 10, 2023

Did this question help you?
Thank you for voting!
The level had a small A shaped spring that flew off across the yard when I was replacing the string. If I buy a lever, will it come with the spring? The trimmer feeds continuously. 8>(
Clifford For model number GH900 - May 27, 2023

Hello Clifford, thank you for your question. No. The spring is sold individually as part 90566944. We are pleased to have been able to help.

eReplacementParts Team
May 27, 2023

Did this question help you?
Thank you for voting!
Will this spoil housing be compatible with my Gh900. Mine is missing the lever.
Deborah For model number GH900 - June 14, 2022

Hi Deborah, Thank you for your question. This kit is not listed for your trimmer. The parts listed in the kit are sold separately for your trimmer. The part number listed under your model number for the gear and spindle is 90563050. The part number listed for the lever is 90567079. The part number listed for the spring is 90566944. The part number listed for the cover is 385022-03N. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
June 14, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(59 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Cutting line wouldn\'t feed out, needed new gear and spindle

Mike from Thousand oaks, California

11 of 11 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
90566944, 90563050
Separated two halves of the motor housing and replaced the gear and spindle.
The new lever for the feed is already in the new part.
Replaced the spring.
Then installed the bottom cover
Did you find this story helpful?
Thank you for voting!

Due to operator error, the trimmer was banged on the ground and the dome cover broke, losing the spring and lever assembly.

kenneth from white haven, Pennsylvania

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
90567076, 90566944
Everything snapped together real easy.
Did you find this story helpful?
Thank you for voting!

Cap broke while in use and lost the spring

Terry from EPHRATA, Washington

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
90566944
Placed the new spring in the new cap and put in place, done.
Did you find this story helpful?
Thank you for voting!

My cover for the spool and the spool had problems after winter.

Pam from Phil Campbell, Alabama

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
90566944, 90564281
I removed the cover by pressing on the side tabs, and removed it, removed the spring and the spool. Placed the spool in correctly Then I let some of the line out out of the spool housing. Placed in the spring and press the cap back on to secure the spool. These parts have made it run great since.

The parts were correct and f it perfectly.

Thanks
Did you find this story helpful?
Thank you for voting!

Lost lever and spring during operation.

Donald from Whitney, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
90567079, 90566944
Removed the string line spool and replaced the lever simply pushing into place and the spring under the cap. No tools used!
Did you find this story helpful?
Thank you for voting!

While weed eating hit a wire fence parts flew - lost the lever bump cover warped

Alice from Port Saint Joe, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
90567079, 90566944, 90564281
Decided to replace the entire AFS and it now works like brand new!! Thank you!!
Did you find this story helpful?
Thank you for voting!

Cover wore out and went flying and lost spring

David from METTER, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
90566944
Put spring in place and snapped cover on . Easy peasy
Did you find this story helpful?
Thank you for voting!

The string coil was broken my fault. The cover the spring and the adjuster to release the string was broke

Laddie from Valdosta, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90566944
Took off the broken parts put on the new parts finished
Did you find this story helpful?
Thank you for voting!

Trimmer spool cover broke

Barbara from North Port, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
90566944
Cover that holds the spool for the trimmer broke. So ordered a new cover and spring. Very easy fix.
Did you find this story helpful?
Thank you for voting!

The bump cover broke and the spring got lost.

Jessica from NANTY GLO, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
90566944
I just needed to put another spool of line on. Then the spring. And finally the bump cover. It took less than 5 minutes.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP18988535
Manufacturer Part Number: 90566944
Brand Model Number Description
Craftsman 90098020 Trimmer - Trimmer/Edger
Black and Decker 98020SE Trimmer - Lst136 - 40v String Trimm
Black and Decker BESTA510 Trimmer - 6.5 14 Afs String Trimmer
Black and Decker BESTA512CM Lawn Mower - 6.5amp 12 Elec 3-I
Craftsman CMCST900B Trimmer - Cordless String Trimmer
Craftsman CMCST900D1 Trimmer - 20v Mx String Trimer
Craftsman CMCST915B Trimmer - Cordless String Trimmer
Craftsman CMCST915D1 Trimmer - Cordless String Trimmer
Craftsman CMCST98020E1 Trimmer - 40v Max Li-Ion Strin
Black and Decker GH610 Trimmer - String Trimmer
Black and Decker GH900 Trimmer - 6.5 Amp String Trimmer
Black and Decker GH912 Trimmer - 6.5 Amp 12in String Trim
Black and Decker LST120 Trimmer - 20v String Trimmer
Black and Decker LST136 Trimmer - 36V String Trimmer
Black and Decker LST136B Trimmer - 40v Lith Str Trimmer
Black and Decker LST140C Trimmer - 40v Lith String Trim
Black and Decker LST201 Trimmer - 20v 10in String Trim
Black and Decker LST201-AR Trimmer - 20v Max 10 String Trimmer
Black and Decker LST201-B2C Trimmer - 20v Max 10 String Trimmer
Black and Decker LST201-B3 Trimmer - 20v Max 10 String Trimmer
Black and Decker LST201-BR Trimmer - 20v Max 10 String Trimmer
Black and Decker LST220 Trimmer - 20V String Trimmer
Black and Decker LST220FC-AR Trimmer - 20V String Trimmer
Black and Decker LST220FC-B2C Trimmer - 20V String Trimmer
Black and Decker LST220FC-B3 Trimmer - 20V String Trimmer
Black and Decker LST220FC-BR Trimmer - 20V String Trimmer
Black and Decker LST300 Trimmer - Cordless 20V Lith String Trimmer
Black and Decker LST320C Trimmer - Cordless String Trimmer
Black and Decker LST400 Trimmer - 12" 20v MAX Lithium High Performance Trimmer and Edger
Black and Decker LST400-1 Trimmer - 12in 20v Max String Trimm