This is available as an individual replacement part. The auger bearing connects to the auger plate and is made of plastic. If this part becomes broken it will need to be replaced and may require a screwdriver during the installation. It is an OEM Craftsman part directly sourced from the manufacturer for use in snowblowers.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fast ship, part installed easily, snow blower is now ready for winter.
This just like Original part, I ordered extra bearings for future fails. Great company to do business with, highly recommended.A++
Guest - September 23, 2019
Verified Purchase
★★★★★
★★★★★
perfect replacement parts
easy to install
Randy - February 6, 2020
Verified Purchase
★★★★★
★★★★★
Great service!
The parts fit perfectly. And thanks to the fast delivery my snow blower was up and running in a very short time. I will definitely buy from ereplacememtparts again. Thank you for your great service!
Guest - February 8, 2020
Verified Purchase
★★★★★
★★★★★
Auger Bearing
First time dealing with these type of bearing, ordering was easy and arrived quickly. The parts was a perfect match for the Snow Blower .
Guest - July 16, 2021
Verified Purchase
★★★★★
★★★★★
Wrong size
returning due to wrong size. Everything was fine with shipping.
Guest - December 20, 2021
Verified Purchase
★★★★★
★★★★★
Great part's that fits perfectly and I'm ready for the next snow storm Thanks 5 star service
This worked perfectly and im extremely happy with my purchase 5 STAR SERVICE AND QUICK DELIVERY
Guest - February 12, 2022
Verified Purchase
★★★★★
★★★★★
Great service and help!
The quickness of my order to arrive was wonderful as were all that helped me along the way. In between huge snowstorms I was able to get my snowblower back up and running like it is new! Now a new storm hits this weekend but thanks to ReplacementParts I am ready!!
Guest - February 24, 2022
Verified Purchase
★★★★★
★★★★★
parts were good
a simple part but they got it to me timely now the snow blower is fixed. I will use them again on other projects. Much better response then the other places I have been dealing with.
Gary S.
Guest - February 14, 2022
Verified Purchase
★★★★★
★★★★★
Quick to find part
Like how you give all the different models the part fits. Came in a timely manner.
Guest - March 2, 2020
Verified Purchase
★★★★★
★★★★★
Easy to install
Part arrived in good fashion
Guest - November 10, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Opened bottom of blower
2. Loosen screws holding auger pulley
3. Removed 3 bolts on each side of auger holding bearings
4. Pulled auger and shaft out front of machine.
5. Opened worm gear case on auger after removing both augers
6. Removed shaft and old worm gear
7. Replaced worm gear and shaft then
... Read moregreased with 00 grease.
8. Make sure bushings flat side align then put back together worm gear casing
9. Removed large grease nut on side of worm gear housing and filled rest of housing with gear.
10. Removed front housing auger and put auger bearings back attached to sides. then put on auger pulley.
11. Put complete assembly back on mower and placed belt on pulley.
12. Had wife run snowblower so I could see auger move like it was suppose to.
Read less
Did you find this story helpful?
Thank you for voting!
snowbloower auger shaft bent
Ervin from Hatley, Wisconsin
2 of 2 peoplefound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Socket set, Wrench (Adjustable), Wrench set
I removed the three bolts from the broken flange and removed it. I placed a 2x2 between the auger and the side of the blower cowling and pried until I could fit the new bearing flange over the end of the auger shaft. Replaced the three bolts and was finished.
Did you find this story helpful?
Thank you for voting!
augur bearings worn out from hard use by previous owner...
unbolted old bearing blocks. Hard part was to spread augur housing to get the new blocks on. Removing the shear pins plus tilting the augur assembly helped. Had to crowbar the housing apart some to get the bearing blocks to pop on. Then it was easy. Only other way would have been to completely disassemble the augur blade assembly.
Did you find this story helpful?
Thank you for voting!
Impeller shaft tension roll pins needed replaced
Kenneth from WERNERSVILLE, Pennsylvania
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
seperate engine from auger assembly/shroud
remove auger drives from shroud by removing auger drive pulley from impeller shaft
remove broken tension roll pins and replace with new
reassemble auger assembly (installed new impeller bearing, key, bearing housing)
replaced auger drive belt while access was readily avail
... Read moreable
reattached auger assembly/shroud to engine
Read less
Did you find this story helpful?
Thank you for voting!
My snow blower \"ate\" a frzen newspaper that was under the snow and bent the Auger drive shaft and Impeller shaft
I had to separate the Auger unit from the engine/drive unit. Then I had to disassemble the auger drive shaft and gear box. I reassembled everything with the parts provided from Ereplacementparts.com and it works like new!. Saved me $600 and from having to buy a new snow blower.
Removed belt cover and belt and separated snowblower removed belt pulley and removed bolts holding auger assembly and tapped the auger drive shaft out of rear bearing removed front augers and separated front gear assembly and removed shafts and tapped gear off the the auger shaft and installed new gear and cleaned housing and reassembled
... Read moreand installed new grease and reinstalled augers and impeller and reinstalled back into blower housing and reinstalled belt pulley and reconnected blower assembly to engine assembly and reinstalled belt and shield and rechecked everything and ran blower.
This was done on a very old Craftsman snowblower with simple plastic bearings mounted directly on the auger side panel.
1. Lubed the three retaining nuts with WD 40 since they were old and rusty.
2. Removed the 3 nuts and the broken plastic bearing.
3. Replaced with a new bearing and replaced the nuts (while momentarily
... Read more stretching the auger side panel slightly to accommodate the new part.
(The replacement part was exactly what I needed from Replacement Parts).
Thanks!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9174338
Manufacturer Part Number: 9517MA
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
