Part Location Diagram of 286431-00 DeWALT Washer,thrust
See part 123 in the diagram
( Grid squares measure 1x1 inch )

Washer,thrust 286431-00

Manufactured by:
DeWALT
ERP Number:
ERP10168846
Part Number:
286431-00
Original Equipment Manufacturer ?
  Works with your model  40-690!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   40-690!

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Delta
This part works with the following products:
  • Scroll Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Scroll saw knocking noise

George from Joplin, Missouri

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Disassembled the saw, installed new bearings and sleeves and lubricated all moving parts with grease.
Did you find this story helpful?
Thank you for voting!

Bearing bad; made thumping noise.

Tam from Orofino, Idaho

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
286431-00, 286270-00
1. Rocker arm main needle bearing does not come with the inner race. Doesn\'t seem right, since the bearing and inner race should always be replaced as a set. Had to order the inner race later, which delayed the repair.
3. Removed complete rocker arm and replaced with new one.
2. Take care not to lose the thrust bearings
Did you find this story helpful?
Thank you for voting!
  • 1