Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect Fit
The brushes on my MAKITA angle grinder were worn out, and I use this tool all the time. Rather than buy a new one, I bought some new brushes for the motor, for a lot less cost than a new grinder. These brushes fit perfectly, and the grinder is back in business again. Hopefully for another 10 years. Thank you, eReplacementParts for having the correct parts that I needed,
Guest - June 1, 2019
Verified Purchase
★★★★★
★★★★★
Refurbishing on old grinder
I have an old Makita 4” grinder and wanted to freshen it up. These guys had the parts I needed and shipped them out promptly. Thanks!
Guest - July 4, 2019
Verified Purchase
★★★★★
★★★★★
Perfect fit !
Purchased replacement parts for my Makita Grinder. The on/off switch was inoperable and the brushes worn out. Shipping was quick. Replaced the parts in minutes and was a perfect fit. Like new again!!!
Isaac - July 13, 2019
Verified Purchase
★★★★★
★★★★★
Received promptly.easy repair.
Correct part, fit perfect, grinder works again!
Guest - July 24, 2019
Verified Purchase
★★★★★
★★★★★
fit correctly
they fit right in and solved the no-work/ sparking problem on my angle grinder.
Tam - October 15, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected.
Correct part. Fast shipping.
Guest - November 30, 2020
Verified Purchase
★★★★★
★★★★★
Great Part
As described. Put these carbon brushes in my 30 year old Makita Grinder, now it runs like new. I always count on EReplacementParts for the parts I can't find anywhere else.
Dnnis - September 9, 2021
Verified Purchase
★★★★★
★★★★★
Exact fit parts I needed!
Exact fit part I needed , was put back together and running in minutes!
Scott - November 2, 2022
Verified Purchase
★★★★★
★★★★★
Working great now easy repair
Arrived quickly waoked great
Troy - March 17, 2023
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(26 rated repairs)?
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Removed the screws from the housing and separated them
Remove the old brush from the brush holder
Installed the new brush in the holder
Screwed the housing back together
1. Removed screws and lifted drill housing off motor.
2. Unclipped brushes from mounting bracket and installed new brushes.
3. Replaced drill housing and screws.
removed screws from drill case
separated drill case
disconnected switch
connected new switch
installed new brushes
connected new cord
put drill case back together
After removing the cover to expose the switch and motor area I proceeded to remove and replace the brushes then I removed the switch pulling each wire from the old switch and installing it on the replacement switch one by one in order so I wouldn\'t put the colored wire in the wrong place a the new switch. Peace of cake!
Did you find this story helpful?
Thank you for voting!
The brushes were wore down and the drill would not run
Disassembled the drill by removing the screws holding the halves together
Removed and polished the armature commutator
Installed new brushes
Reassembled the drill.
Ran it and drilled at low speed and high torque to check successful repair.
1. Remove the screws from the housing and separate them
2. Remove old brushes from the brush ring and install the new brushes
3. Crimp the terminals on the new overload
4. Disconnect the old overload
5. Connect the new overload
6. Screw the housing back together
Removed the screws from the housings, and separated them. Removed the old worn brush from the brush ring and installed the new ones. Place the brush ring back. Then replaced the screws in the housings.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
