Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect Fit
The brushes on my MAKITA angle grinder were worn out, and I use this tool all the time. Rather than buy a new one, I bought some new brushes for the motor, for a lot less cost than a new grinder. These brushes fit perfectly, and the grinder is back in business again. Hopefully for another 10 years. Thank you, eReplacementParts for having the correct parts that I needed,
Guest - June 1, 2019
Verified Purchase
★★★★★
★★★★★
Refurbishing on old grinder
I have an old Makita 4” grinder and wanted to freshen it up. These guys had the parts I needed and shipped them out promptly. Thanks!
Guest - July 4, 2019
Verified Purchase
★★★★★
★★★★★
Perfect fit !
Purchased replacement parts for my Makita Grinder. The on/off switch was inoperable and the brushes worn out. Shipping was quick. Replaced the parts in minutes and was a perfect fit. Like new again!!!
Isaac - July 13, 2019
Verified Purchase
★★★★★
★★★★★
Received promptly.easy repair.
Correct part, fit perfect, grinder works again!
Guest - July 24, 2019
Verified Purchase
★★★★★
★★★★★
fit correctly
they fit right in and solved the no-work/ sparking problem on my angle grinder.
Tam - October 15, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected.
Correct part. Fast shipping.
Guest - November 30, 2020
Verified Purchase
★★★★★
★★★★★
Great Part
As described. Put these carbon brushes in my 30 year old Makita Grinder, now it runs like new. I always count on EReplacementParts for the parts I can't find anywhere else.
Dnnis - September 9, 2021
Verified Purchase
★★★★★
★★★★★
Exact fit parts I needed!
Exact fit part I needed , was put back together and running in minutes!
Scott - November 2, 2022
Verified Purchase
★★★★★
★★★★★
Working great now easy repair
Arrived quickly waoked great
Troy - March 17, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the screws from the housing and separated them
Remove the old brush from the brush holder
Installed the new brush in the holder
Screwed the housing back together
1. Removed screws and lifted drill housing off motor.
2. Unclipped brushes from mounting bracket and installed new brushes.
3. Replaced drill housing and screws.
removed screws from drill case
separated drill case
disconnected switch
connected new switch
installed new brushes
connected new cord
put drill case back together
1 - Remove 5 screws that secure the two motor housings together.
2 - Opened up the housing to reveal the motor and grinder gears and bearings.
3 - Lifted out the motor from the housing.
4 - used a pair of needle nose pliers to grip the ends of brush #1 on one side of motor and pulled it out from the motor slot. Repeated
... Read more the same step for brush #2.
5 - Pushed the new brushes into the old motor slots.
6 - Replace motor back into housing with bearings and gears.
7 - Secured the motor housings back together again with the 5 screws.
8 - Plugged in the power cord, and the motor / grinder ran perfectly again.
Read less
Did you find this story helpful?
Thank you for voting!
Sander loses power when engaged in work & wobbles when engaged in work surface
Inserted brushes and re-assembled the tool. It still has the same symptoms, guess it\'s just worn out. I can\'t see anything else visibly wrong with it but it is 20 years old.
Makita Angle grinder. Removed the Philip head screws, opened the grinder. Replaced broken parts, assembled the grinder in reverse order. ThatÆs itæìdone in minutes. Awesome parts! Perfect fit.
Did you find this story helpful?
Thank you for voting!
Brush holder came loose and cause the brushes to wear badly
Disassembled the tool, removed the motor assembly, removed the brushes and holder assembly, removed the armature and cleaned and machined it in my drill press, cleaned out the housing, removed old hardend grease and reassembled with new grease, and new brushes. works great.
Removed old worn brushes and replaced with new set. A very easy fix and the replacement part was a exact fit ..grinder works great again. Very good product, thanks a bunch!!!
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
